Kaleidoscope Projector Light User Manual Read and save these instruction before use W10I0198 / AL93
THANK YOU Thank you for purchasing Kaleidoscope Projector Light. There are 8 different light effects, easily switch between colors and lighting, over 120 effects. For your convenience, APP to connect and control all your lights, utilize timer to save energy. IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug. This product employs overload protection (fuse).
PACKAGE CONTENT Installation kit: A B C A. Projector (1 set) B. Adapter (1 set) C. Stake Set (1 set) D. Base (1 set) D PRODUCT SPECIFICATION Specification Parameter Input 120V~ 60Hz, 0.5A Output 9V, 1A Color Red/Green/Blue/White Mode Steady/Sparkle/Glimmer/Fade/Candle/Fireworks/Surge/Show Timer 2/4/6/8 hr Led Operation 12V, 1.5A Operating Temperature -15°F~90°F Dimension 4.19 * 8.11 * 14.
INSTALLATION 1. Screw to connect the assembled stake with the projector securely. Or screw to connect the base with the projector securely. Or 2. Connect the adapter as figure shows.
USE AND OPERATION Preparation 1. Presetting timer: 6 hours ON / 18 hours OFF. 2. Press the mode button to switch light modes.
CAUTION: 1.Do not place product near any heat source such as radiators, stoves, fireplaces, etc. 2.Do not use in a bathroom. 3.Do not secure the wiring of the product with staples or nails or place on sharp hooks or nails. 4. Do not close doors or windows on the product or product cord as this may damage the wire insulation. 5.Do not cover the product with cloth, paper or any material not part of the product when in use. 6. Do not operate unit with damaged plug. 7.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
