User manual
8www.doro.com
Configure VoIP servers and accounts�
VoIP Server
In Idle mode, press
0
, choose Settings, and press
0
.
Choose VoIP settings, and press
0
.
Chose Server 1 (and Server 2 if required) and then press
0
.
You then specify the Domain and the SIP proxy.
• Choose Domain and press
0
.
• Enter the domain name. Press
0
.
• Choose SIP proxy, press
0
, and then key in domain name or IP address of the SIP
proxy, if it is different from the Domain.
SIP Account(s)�
Choose the appropriate SIP Account and ll in the user data. If you have more than
one SIP account, then you need to enter the account settings for each account.
Choose the listed parameters one by one, press
0
.
• Display name (optional) – Caller ID that the called party sees
• Nickname – name of the account used in Call Groups and VoIP line settings
• SIP user name – usually the phone number you received from your service provider
• Authentication Name – usually the same as User name
• SIP password – the password you received from your SIP provider
• Server ID – assign VoIP Server 1 or 2 as specied in previous section (default=1).
After each change, press
0
and then the Yes key when prompted to save changes. When
requested to reboot the gateway, press Yes or press Reset button on the rear of the gateway.
Change the PIN code
Make sure to change the PIN code after rst login to prevent unauthorized access to your
VoIP settings.
In Idle mode, press
0
, choose Settings, and then press
0
.
Choose VoIP settings, and then press
0
.
Choose Change PIN code and then press
0
.
Enter a new PIN code, and then press
0
.
Press the Yes key when prompted to save the PIN code.
For future reference, write your new PIN code here:
Note!
The handset PIN code and the online conguration password are independent of each other. Changing the
handset PIN code will not affect the online conguration password.
1�
2�
3�
1�
2�
1�
2�
3�
4�
5�
6�
Index