User manual

9 www.doro.com

First setup via web-interface

The following sections describe how to congure and set up your phone for rst use.

You have to congure your phone before it is ready for rst use. You will need the

account information that you received from your SIP Service Provider to complete the

conguration of your phone.

Configure using a web browser

Open a browser on your PC; go to the IP address of the gateway (Press the volume up

key to get the IP address).

username: admin

password: admin

In the menu, select and configure VoIP Server 1 (and VoIP Server 2 if required) by filling in:

• Server is local: Yes or No

• Proxy address: IP or DNS address of the SIP-Server

• Domain: Usually the same as Proxy address

• Server port: 5060 is default

• Re-registration time: 3600 is default

• Domain cong: Add domain or Force domain

• DTMF Signalling: Inband, SIP-Info or RFC2833

• Codec priority: Set the order for codec usage

• Enable silence suppression: Yes or No

Click SAVE CHANGES�

In the menu, choose VoIP Accounts and configure Account 1 (and 2 -8 if needed):

• Account alias name: Name of the account used in call groups (Nickname)

• Used VoIP server: VoIP Server 1 (or 2. if the second VoIP Server has been congured)

• SIP user name: Usually the phone number you received from your service provider

• SIP auth name: Usually the same as SIP user name

• SIP auth password: the password you received from your SIP Provider

• Display name (optional): Caller ID that the called party sees

• Voice Mailbox Name:

• Voice Mailbox Number:

Click SAVE CHANGES.

If more than one VoIP Server or VoIP Accounts has been congured you may select

which account should ring on your handset and also set what account (or line) to use for

outgoing calls in the menu Telephony Settings.

Click SAVE CHANGES.

Click Reboot to activate your settings.

1�

2�

3�

4�

5�

6�

7�

8�

9�

Index