User manual

22www.doro.com
Settings
Audio Settings
The following settings are available in the Settings/Audio Settings menu:
Ringer Melody: Choose the type of call and specify a ringer melody.
Ringer volume: Adjust the volume.
Message tone: Set tone, select Silent for no message tone.
Keypad sound: Set sound, select Silent for no keypad sound.
Advisory tones: Set the following advisory tones.
Battery alert: Battery warning ON/OFF.
Range tone: Handset is out of range ON/OFF.
Confirmation: Tone after action. By default all advisory tones are activated.
Silence: Set Silent on to disable all tones/sounds above. Alternatively, you can
activate silent mode from the idle menu by pressing
#
key and then Silence off.
Telephony Settings
The following settings are available in the Settings/Telephony Settings menu:
Call forward: Select line and the following call forward options are displayed:
On busy: Forwards the call when you are talking on the phone.
On no answer: Forwards the call when you do not answer the phone
Unconditionally: Forwards all incoming calls.
Choose the preferred option, and then choose Activate/Deactivate. When
activating, key in the number to which you want to forward your calls, or press
Options, choose Contacts, and then choose the preferred contact. Press
0
. The call
forwarding option is now enabled.
It is not possible to activate/deactivate Call Forward before the operator codes has been
set via the web interface. Please consult the Owners manual at www.doro.com.
Voicemail: Select Landline or preferred account and enter the voicemail number. For VoIP
accounts choose Subscription, and then enter the SIP address of the subscription service.
(Contact your Internet Telephony Service Provider for more information on this feature.).
Answer mode: Select option:
Auto answer: Answer automatically when you pick the handset from the charger.
Any key answer: Answer incoming calls by pressing any key on the keypad.
Landline dialmode: Select Pulse or Tone. Must be in tone in most countries.
Emergency line: Select Landline or VoIP line. The default setting for emergency
calls is VoIP. You can change which way you want your emergency calls routed.
Important! If your emergency line is set to VoIP, we strongly recommend that you check with your
Internet Telephony Service Provider whether they have a service that makes it possible for your call to
reach the appropriate emergency call center and for the emergency call center to locate where you are calling
from. If you set emergency line to landline, check that you have a working landline connection.
1�
2�
3�
4�
5�
1�
2�
3�
4�
5�
Index