User manual

23 www.doro.com
Primary line: The primary line setting determines which line is used for outgoing
calls when you press
O
. Select Landline or VoIP line.
VoIP line: The VoIP line setting determines which VoIP account is used for outgoing
VoIP calls. Select the VoIP account you want to use for outgoing VoIP calls. All
nicknames for the VoIP accounts you subscribe to are listed. If you only have one
account, only one nickname is listed.
Call Groups: If you have more than one handset, you must specify from which
account or accounts you want each handset to receive calls. All nicknames for the VoIP
accounts you subscribe to are listed, and so is the landline. Clear any accounts for which
you do not want the current handset to receive calls.
VoIP settings
Typically, you congure your VoIP settings via a computer, but the following settings are
available in the Settings/VoIP Settings menu:
Server 1 (2): Set the following SIP-server data:
Domain: Domain name of VoIP server.
SIP proxy: Usually the same as Domain
Accounts: Set the following SIP-account data for account 1-8:
Display name: Caller ID that the called party sees (optional)
Nickname: Name of the account.
SIP user name: Usually the phone number received from the service provider.
Authentication name: Usually the same as SIP user name.
SIP password: The password you received from your service provider.
Server ID: Select Server 1 or 2 as done in Server settings.
Internet Settings
Use Internet settings to congure your phone’s Internet connection.
NAT Provisioning: Select the preset (1-4) NAT configuration or manual. Press
Help to see explanation of each configuration.
Manual/STUN mode: Selects usage of STUN (Simple Traversal of UDP through
NAT). STUN allows the phone to detect that NAT (Network Address Translation) is
being used by your router.
Manual/STUN keep alive: Species the interval for sending out packets to keep the
connection open between the gateway and the Internet.
Manual/Rport mode: Selects usage of Rport for Symmetric Response Routing.
Manual/SIP port: Sets the local SIP port which could be mapped in the router.
IP Mode: Selects Dynamic or static IP. Settings below are only available in Static mode.
Default mode is Dynamic.
IP address: Sets the Internet address.
Subnet mask: Sets the Subnet mask.
DNS server: Sets the IP address of the DNS server.
Default gateway: Sets the Gateway (router) address.
6�
7�
8�
1�
2�
1�
2�
3�
4�
5�
6�
Index