User manual

26www.doro.com
Configuring via web-interface
The following sections describe how to congure your phone via the web-interface.
Configure using a web browser
Open a browser on your PC; go to the IP address of the gateway (Press the volume up
key to get the IP address).
Log in to the menu. default settings:
username: admin
password: admin
The following menus are available on the left side:
Home - Start page with system and status information
VoIP Server 1 - Conguration for VoIP server 1
VoIP Server 2 - Conguration for VoIP server 2
VoIP Accounts - Conguration for VoIP Accounts 1-8
Management Settings - Set Conguration and Firmware update server
NAT/RTP Settings - Conguration for NAT and SIP/RTP-port conguration
IP Settings - Conguration for IP-mode (Static/DHCP)
Pincode Settings - Conguration for Handset/Base pin codes and web interface
username/password.
Telephony Services - Conguration for Call forwarding codes
Telephony Settings - Conguration for Incoming call destinations and Outgoing
call account/PSTN for each registered handset
Time Settings - Conguration Automatic Time via NTP
Debug - Event log
SIP Trace - SIP event log
Example of Home page displaying system and status information
1�
2�
3�
Index