User manual
29 www.doro.com
SIP/RTP Settings
SIP/RTP ports can be dened if server or routers requires it.
Silence suppression for G729: This denes if silence suppression shall be used.
This is only used if the codec supports it. Currently supported: G729 annex B
SIP/RTP port range: The number of ports that can be used for RTP audio streaming
SIP/RTP port: The rst RTP port to use for RTP audio streaming
Local SIP port: Port used for rst user agent (UA) instance. Succeeding UA’s will get
succeeding ports
SIP/RTP TOS: Priority of RTP trafc based on the IP layer ToS byte. See RFC 1349
for details. “cost bit” is not supported.
o Bit 7..5 denes precedence.
o Bit 4..2 denes Type of Service.
o Bit 1..0 are ignored.
Setting all three of bit 4..2 will be ignored.
Click SAVE CHANGES and thereafter REBOOT if no further settings are to be made.
IP Settings
In the menu, choose IP Settings to congure the following
DHCP/Static IP: Species whether to use dynamic or static IP.
IP Address: Species the Internet address.
Subnet Mask: Species the subnet mask.
Default gateway: Species the gateway (router) address..
DNS (primary): Species the IP address of the DNS server
DNS (secondary): Species the IP address of the alternative DNS server
Click SAVE CHANGES and thereafter REBOOT if no further settings are to be made.
Pincode Settings
In the menu, choose Pincode Settings to congure the following
VoIP Settings Pincode: Base station VoIP access code (default 0000)
AC Code: Base station DECT registration access code (default 0000)
HTTP Server Username: Local HTTP server authentication name (default: admin)
HTTP Server Password: Local HTTP server password (default: admin)
Note!
If you gateway has a public IP address or is otherwise exposed to the Internet it's highly recommended to
change the password.
Click SAVE CHANGES and thereafter REBOOT if no further settings are to be made.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Index