Cut Sheet

• UL Listed
• Zinc Plated
• Holds 10, 12, or 14 Ga. Copper Wire
• Holds 10, or 12 Ga. Aluminum Wire
Ground Clips are intended to be pressed on the
top edge of a box to hold a No.10, 12, or 14AWG
copper or No.10, or 12AWG aluminum grounding
conductor against the side wall. This clip may be
used for connecting the grounding conductor of
nonmetallic sheathed cable to outlet boxes or for
connecting the grounding jumper from a recepta-
cle to an outlet.
Ground Clips | PC 5640
• Steel
• Green Zinc Plated
• 1/4" or 5/16" Head
• Leader or Thread Cutting Point
Ground screws are plated green for identification
purposes and are used for grounding pigtails or
wire. They have either a 1/4" or 5/16" head with
Hex/Slotted/Phillips drive. The 1/4" (1032G &
1032GTP) has a leader point; the 5/16" (1032TC
& 1032TCTP) has a thread cutting point.
C20
Ground Screws | PC 5620
To Order: Phone [phone] / Fax [phone]
1032G 14107 Leader Point 1/4" 10/32 x 3/8" 100 1000 0.44# C
Hex/Phillips/Slot
1032GTP 14108 1/4" 10/32 x 3/8" 500 3000 4.20# C
1032TC 14109 Thread Cutting Pt. 5/16" 10/32 x 3/8" 100 1000 0.50# C
Hex/Phillips/Slot
1032TCTP 14111 5/16" 10/32 x 3/8" 500 3000 4.86# C
Tu ff
Pack
Tu ff
Pack
CAT NO UPC DESCRIPTION HEX SIZE SCREW SIZE STD MSTR WT/STD UNIT
GP650 16100 7-1/2" 12 Ga 250 2000 4.90# C
GP1050 16102 10-1/2" 12 Ga 250 2000 6.56# C
GP1250 16103 12-1/2" 12 Ga 250 1000 7.44# C
CAT NO UPC SIZE GAUGE STD MSTR WT/STD UNIT
FITTINGS
GC 27050 100 1000 0.38# C
GCTP 27051 500 3000 1.90# C
CAT NO UPC STD
MSTR WT/STD UNIT
Tu ff
Pack
• Green Zinc Plated Ground Screw
• Green #12 Ga. Solid Copper Wire
• 7-1/2", 10-1/2" or 12-1/2" Lengths
• 1/4" Hex/Phillips/Slotted Head (Leader Point)
• UL Listed Wire
Ground pigtails are used for grounding
receptacles to steel boxes.
Ground Pigtails | PC 5630