Cut Sheet

ManualsBrandsDottie ManualsAnchors3/8 X 2-3/4" Wedge Anchors Full Thread Stainless

• Wedge

• Full Thread

• Stainless Steel

Stainless Steel Wedge Anchors resist corrosion and are ideal

for applications where chemical resistance is required.

Stainless can be mildly magnetic. ICBO approved.

Wedge Anchors Full Thread • Stainless Steel | PC 4310

W14134 59300 1/4-20 1-3/4" 3/4" 100 1000 3.22# C

W14214 59302 1/4-20 2-1/4" 1-1/4" 100 1000 3.73# C

W14314 59304 1/4-20 3-1/4" 2-1/4" 100 1000 4.81# C

W38214 59306 3/8-16 2-1/4" 1-1/8" 100 1000 8.44# C

W38234 59307 3/8-16 2-3/4" 1-1/2" 100 500 9.67# C

W38300 59308 3/8-16 3" 1-3/4" 100 500 10.25# C

W38334 59310 3/8-16 3-3/4" 2-1/2" 100 500 12.04# C

W38500 59311 3/8-16 5" 3-1/2" 50 250 7.72# C

W12234 59312 1/2-13 2-3/4" 1-1/2" 50 250 9.53# C

W12334 59313 1/2-13 3-3/4" 2-1/4" 50 250 11.51# C

W12400 59314 1/2-13 4-1/4" 2-3/4" 50 250 12.72# C

W12512 59316 1/2-13 5-1/2" 3-1/4" 25 100 7.78# C

ANCHOR OVERALL THREAD

CAT NO UPC HOLE DIA LENGTH LENGTH STD MSTR WT/STD UNIT

• Wedge

• Full Thread

• Zinc Plated

Wedge anchors can be installed through the fixture. Assemble nut

and washer until the nut is flush with the top of the anchor and

insert into predrilled hole. Anchor is hammered into hole until the

washer is flush with surface of the fixture. Expand the anchor by

tightening the nut. It has good shear values. ICBO approved.

UPC Vendor ID Code: 78-1002

Wedge Anchors Full Thread • Zinc Plated | PC 4540

See new products at www.lhdottie.com

WS14134 70310 1/4-20 1-3/4" 3/4" 100 1000 3.22# C

WS14214 70312 1/4-20 2-1/4" 1-1/4" 100 1000 3.78# C

WS14314 70314 1/4-20 3-1/4" 2-1/4" 100 1000 4.76# C

WS38214 70320 3/8-16 2-1/4" 1-1/8" 100 1000 8.15# C

WS38234 70322 3/8-16 2-3/4" 1-1/2" 100 500 9.51# C

WS38300 70324 3/8-16 3" 1-3/4" 100 500 9.85# C

WS38334 70326 3/8-16 3-3/4" 2-1/2" 100 500 11.04# C

WS38500 70328 3/8-16 5" 3-1/2" 50 250 7.22# C

WS12234 70340 1/2-13 2-3/4" 1-1/2" 50 250 9.32# C

WS12334 70342 1/2-13 3-3/4" 2-1/4" 50 250 10.02# C

WS12400 70344 1/2-13 4-1/4" 2-3/4" 50 250 11.41# C

WS12512 70346 1/2-13 5-1/2" 3-1/4" 25 100 7.75# C

ANCHOR OVERALL THREAD

CAT NO UPC HOLE DIA LENGTH LENGTH STD MSTR WT/STD UNIT

TECH

TALK

ANCHORS