Operating instructions

MODEL 400 WOODSTOVE
2. FIREBRICK PLACEMENT.
Make sure the firebricks are in position and not broken
before operating the unit. Also make sure the baffle insula-
tion is positioned all the way against the rear of the unit.
✔ PRE-USE CHECK LIST
Use the following checklist as a guide to be sure your instal-
lation is correct and complete.
All of the safety warnings have been read and
followed.
Floor protection requirements have been followed.
Chimney connector is properly installed.
The proper clearances from the stove and chimney
to combustible material have been met.
The masonry chimney is inspected and clean or
the factory built metal chimney is installed
according to the manufacturer’s instructions and
clearances.
The chimney meets the required minimum height.
5-98 16 72308B
CAUTION:
IF THE OPTIONAL BLOWER KIT IS
USED, THE CORD SHOULD BE
ROUTED AWAY FROM THE UNIT.
WARNING!
NEVER DRAW COMBUSTION AIR
FROM A WALL, FLOOR OR CEIL-
ING CAVITY OR FROM ANY
ENCLOSED SPACE SUCH AS AN
ATTIC OR GARAGE.