Operating instructions

MODEL 400 WOODSTOVE
WARNING!
DO NOT OPERATE THE WOOD-
STOVE IF THE DOOR GLASS IS BRO-
KEN OR MISSING. DANGEROUS
OVERFIRING CAN OCCUR WHICH
CAN DAMAGE THE APPLIANCE OR
IGNITE CREOSOTE IN THE CHIMNEY,
POSSIBLY CAUSING A HOUSE FIRE.
H. INSTALLATION OF REPLACEMENT GLASS
5-98 25 72308B
1. Make certain the fire is out and the appliance is
cool to the touch.
2. Remove door from the appliance.
3. Lay door face down on a table or counter with
the door handle hanging off the edge of the table
so the door lays flat. Protect the table so neither
the table nor door will be scratched.
4. Remove the screws from each glass retainer.
5. Remove the glass.
6. Use only 5mm Ceramic Glass, Part No. 20912.
7. Position the glass with its edges evenly overlap-
ping the opening in the front door.
8. Replace the glass retainers. Be careful not to
cross thread the screws.
9. Tighten each retainer just a few turns until each
is secured. Then continue to tighten alternately
each retainer a few turns at a time until the glass
panel is tightened snugly.
10. Replace the door on the appliance.