User Manual

DTT-&00/1900 Operating Manual
2. Technical Specification
2.1
800MHz bandwidth
AIR INTERFACE
Battery Back-up
Connectors for various
Service support
Physical
Environmental
Power Supply
Accessories
Common air interface standard - IS-95A, IS-95B
FREQUENCY
----’ TX: 824 - 849MHz
RX: 869
- 894MHz
TX Max. Output Power
+ 307mW ERP
RX Sensitivity
-+ - 104dBm below
Vocoder
+
8W13K QCELP, 8K EVRC
Channel Bandwidth
-+ CDMA 1.25Mhz
RX Conducted Spurious -+
TX BAND : -61dBm below
RX BAND : -81dBm below
MOD/DEMOD
4 0 QPSWQPSK
Frequency Accuracy
--+ Fo+300Hz
Type
--+ Ni-Cd
Capacity
- 6V @ 1.7A
Talk Time ---* 2 Hours
Standby Time
--+ 20Hours ( at slot cycle index 1 )
RJ-1 1
- Standard wire-line telephone
Analog G3 Fax (Optional)
Serial port -+ Maintenance Purpose
Data Service Purpose (Internet, PC Fax)
Dimension (DxWxH) + 19Oxl70x55mm
Weight (including Backup battery)
-+ 750g
Operating temperature
- 0 “C - +50 “C
Input Power ---+ 100 - 24OV,
50/60Hz
Output Power - DC 12V @ 1.3A
Internal Antenna --+ Di-Pole Antenna
Power supply (SMPS)
Power Cord
Tel-line Cord
O