User Manual

Steps 1, 2, 3 to turn on the heater
Step 1 – Plug in power cord to outlet.
Step 2 – Press power button on the
unit.
Step 3 – Press Mode button on the
unit.
The heater default setting is 68ºF, if
room temperature is above 68ºF, the
heater won’t start if the room
temperature is higher than the set
temperature. Please check Room
Temp, and increase Set Temp to start
heater.
Note: Heater will not turn on if the
room temperature is higher than
86ºF.
Show Room Temp - Press Mode + V
keys then let go
Increase Set Temp – Press up
button “^” until Set Temp is above
Room Temp.