Product data

FLAT-PAK
™
SERIES
Model FP-UBC6
Unbalanced to Balanced Converter
INPUT
2A MAX
PWR BUS
OUTPUT
INPUT
1A MAX
INPUT 1
OUTPUT 2
GAIN
INPUT 2
GAIN
OUTPUT 1
24 VDC
POWER
FP-UBC6
CURRENT
75 mA
INPUT 3
OUTPUT 4
GAIN
INPUT 4
GAIN
OUTPUT 3
INPUT 5
OUTPUT 6
GAIN
INPUT 6
GAIN
OUTPUT 5
POWER
SOURCE
24 VDC
OR
Power to Additional
Flat-Pak Modules, Total
Current Not to Exceed 2 A
or Available Supply Current
Unbalanced Audio
Source Feeding
FP-UBC6 Input
Balanced Audio Outputs
Feeding Other Balanced
Audio Equipment
Gain ShownSet
for +4 dBu Output
From A -10 dBV
Input
TYPICAL PERFORMANCE
Amps per FP-UBC6: 6 identical circuits
Gain: -5 dB to +10 dB adjustable (relative to +4 dBu output for –10 dBV input);
(separate controls for each channel)
Input level: -20 dBV to –5 dBV (for +4 dBu output)
Input impedance: 10 kΩ
Input configuration: Unbalanced
Output impedance: 150 Ω balanced, drives 600 Ω or 10 kΩ lines
Output configuration: Balanced or unbalanced
Frequency Response: 20 Hz to 40 kHz (+/- 0.25 dB)
Total Harmonic Distortion: < 0.05%; typ. 0.01% (1 kHz)
IMD: < 0.02%
Output Level: +4 dBu
Headroom: > 18 dB (at rated output level of +4 dBu)
Noise: < -90 dB referred to +4 dBu (20 Hz to 20 kHz)
Crosstalk: Better than -80 dB (20 Hz to 20 kHz)
Power Requirement: 24 Vdc @ 75 mA, Ground-referenced
Overall Dimensions: Height: 1.29 in. 3.28 cm
Width: 3.25 in. 8.26 cm
Length: 8.55 in. 21.72 cm
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.
Installation/Operation
Radio Design Labs Technical Support Centers
U.S.A. [phone], [phone]; Fax: [phone]
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
891-2030C