User manual
7
Superior Broadcast
ATVCA Amplifier User Manual
Superior Boadcast ATVCA Amplier
4.3 Frontal Panel Description
[1] DISPLAY LCD display.
[2] ON Green LED: indicates that the amplier is switched on.
[3] LOCAL Yellow LED: indicates that the amplier is in local control
mode.
[4] WARNING/INTERLOCK Yellow LED: indicates a condition that doesn’t inhibit the
output of the transmitter and is reported via GUI and
telemetry.
Red LED: indicates that the amplier is switching off. This
status is caused by an external condition that is blocking the
power output.
[5] WAIT/FAULT Yellow LED: indicates a condition that inhibits the output
power of the transmitter before attempting to restore, it is
reported via GUI, TC/TS and telemetry.
Red LED: indicates a fault that cannot be automatically
reverted. This condition is generated after 10 restore attempts
from WARNING condition, and it can block the machine; it is
reported via GUI, TC/TS and telemetry.
[6] CONTRAST Trimmer to regulate the contrast of the LCD display.
[7] AIR FLOW Grill for the ventilation ow passage.
[8] POWER AC mains ON/OFF switch.
[9] ESC Button used to exit from a menu.
[10] Button used to navigate in the menu system and to modify the
changeable parameters.
[11] Button used to navigate in the menu system and to modify the
changeable parameters.
[12] ENTER Button used to accept a parameter’s value or to enter into a
menu.
ATVCA
5 / 32
User Manual
Rev. 1.0 - 22/11/10