User manual
24
Superior Broadcast
ATVCA Amplifier User Manual
Superior Broadcast ATVCA Amplier
When turned on, the LCD shows the introductory screen with the equipment’s
software and hardware versions.
A few seconds later the main screen shows RF output forward and reected power
values:
Press the ESC key to view the selection screenful from which to access all the
menus:
To access one of the submenus select its name (which is underlined by a blinking
cursor) using the RIGHT or LEFT keys and then press the ENTER key.
Take note that certain parameters are named but their values are not available.
This occurs when a parameter is useless for control software internal use.
When the value of a parameter is not available for the aforesaid reason, symbol
“==” appears on the display in lieu of the value.
8.1.1 Function Menu (Fnc)
In this menu, you can set RF output power On/Off, toggle between “Local”
or “Remote” control mode and set the Forward Power Good (PgD) threshold
level.
In order to edit a row, highlight the appropriate row using the
or buttons and
then press and hold the ENTER button until the command has been accepted. This
way, Pwr setting is toggled between ON or OFF and Loc setting has been toggled
between LOCAL or REMOTE. In order to edit Power Good threshold in Pg1 to 4
rows, edit its value using buttons
and ; nally, press ENTER to conrm.
22 / 32
User Manual
Rev. 1.0 - 22/11/10
ATVCA