User manual
25
Superior Broadcast
ATVCA Amplifier User Manual
Superior Boadcast ATVCA Amplier
Pwr It enables (ON) or disables (OFF) the RF power output.
Sts It modies machine operation. In the LOCAL mode, the machine
can read and modify its operating parameters through the navigation
keys and the management rmware, whereas all other setting gates
are locked out. In the REMOTE mode, the machine can only read its
operating parameters; in this case parameters are modied based on
the command received from other connected telemetry system.
Pg1 It modies the Power Good (forward power) threshold. The Power Good
level is a percentage of machine’s rated power (1000 W), not of forward
output power expressed in Watt. This does mean that this threshold
when set at 50% will give a warning at 500 W (=50% of 1000W). When
RF output power drops below the Power Good threshold setting, the
machine changes the state of pin [9] of the DB25 labelled ‘Telemetry’
connector located in the rear panel.
Pg2 See PG1. The machine changes the state of pin [22] of the DB25 labelled
‘Telemetry’ connector located in the rear panel.
Pg3 It modies the Power Good (reected power) threshold. The Power Good
level is a percentage of machine’s rated power (100 W), not of reected
output power expressed in Watt. This does mean that this threshold
when set at 50% will give a warning at 50 W (=50% of 100W). When
RF output power drops below the Power Good threshold setting, the
machine changes the state of pin [18] of the DB25 labelled ‘Telemetry’
connector located in the rear panel.
Pg4 See PG3. The machine changes the state of pin [4] of the DB25 labelled
‘Telemetry’ connector located in the rear panel.
ATVCA
23 / 32
User Manual
Rev. 1.0 - 22/11/10