User manual


32

Superior Broadcast
ATVCA Amplifier User Manual
Superior Broadcast ATVCA Amplier
!!HALTED FOR !!
OVER FWD Power
II. Over Reected Power
Reected power alarm display.
!!HALTED FOR !!
OVER INP Power
III. Over Input Power
Input power alarm display.
!!HALTED FOR !!
OVER INP Power
IV. Over Input Power
Current absorbed alarm display.
!!HALTED FOR !!
OVER MOS CURRENT
Once the machine goes into ‘FAULT’ mode, it will no longer attempt to re-start;
user may choose the appropriate reset procedure according to current machine
setting:
• Machine set to LOCAL control option - press ‘Reset Alm’ in the alarm menu
(Alm) or power off and back on again using the POWER switch.
• Machine set to REMOTE control option - power off and back on again sending
the appropriate command via the “TELEMETRY” DB25 connector.
Over temperature is a fth alarm that does not trigger a permanent ‘WAIT’
condition,when it occurs the machine temporarily interrupts its working. It occurs
if temperature exceeds 85°C (Celsius degrees), appropriate yellow LED turns on
and the following screen appears:
30 / 32
User Manual
Rev. 1.0 - 22/11/10
ATVCA