Operation Manual

- 103 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
Video output:
Output Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
Serial Interface RS 232:
Type RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming
Ethernet:
100 Mbit compatible, bi-directional interface
Function Update of Firmware and Preprogramming
SATA port:
Connection of an internal 2,5“ SATA hard disk
or connect an external hard disk on the eSATA connector
USB:
2x USB 2.0 Host Connector
LNB power and polarization per tuner:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA LNB
Voltage horizontal < 20V without load, > 17,3V at 400mA LNB
LNB shut-off at Standby-Mode
Count of active satellite positions:
DiSEqC V1.0/1.1/1.2/1.3 (USALS)
OLED-Display:
The OLED will lose its brightness after roughly 40.000 hours of operation.
If the loss of brightness is too strong after this period, the OLED can be replaced with a new one.
Power consumption:
< 15W on 12V
Input voltage:
DC12V +/- 15%
Externes power supply: (DVE Modell: DSA-36W-12)
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 2,0A
Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 374 mm x 230 mm x 75 mm
Weight: 2,2 kg without HDD