Operation Manual

- 83 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
11.2 DVB-C Tuner configuration
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “Service searching” and press the OK-Button.
¾ The “Service searching” menu will open up.
2. Navigate to the option “Tuner configuration” and press the OK-Button.
¾ The “Choose tuner“ menu will open up.
3. Use the Navigation-Buttons up and down to select the DVB-C Tuner and press the OK-Button.
¾ The “Reception settings” menu will open up.
Frequency bands
This type of searching scans the frequencies used by most cable providers. This setting is
the default.
Use the Navigation-Buttons left/right to set the “Used service scan type” option to
“Frequency bands”.
Press the OK-Button to save your settings.
You will be taken back to the “Select slot” menu.