Instruction manual

ManualsBrandsDreamGEAR ManualsMP3/MP4 playersi.Sound Max

i.Sound® MAX

PO Box 478

Torrance, CA 90508

www.dreamgear.net

www.isound.net

Package Contents:

• Main Speaker Unit

• Wireless Remote Control

• 3.5mm Audio Cable

i.Sound® MAX Set-up Instructions:

1. When using the i.Sound® MAX Speaker in battery

mode,remove the battery lid located on the

bottom of the main speaker and properly insert

4“AA” batteries as indicated in the battery

compartment. Replace the battery lid.

2. When using a wall-outlet, use the included AC

adapter and plug it into the DC input jack on the

rear of the i.Sound® MAX Speaker System.

Note: only when using the AC adapter, your iPod® will charge

while sitting in the speakers’ base.

Listening to music:

1. Place your iPod

® into the speaker‘s dock. The MAX

Speaker System features different iPod

® spacer

brackets. These spacers are used for different

models of iPod

®. Choose the proper iPod® spacer

and snap it into the MAX’s docking area. (each

iPod

® spacer bracket has the corresponding iPod®

name on it)

2. The i.Sound® MAX is also compatible with iPod

shuffle as well as any other audio device with a

standard headphone jack.

To connect an iPod

® shuffle or other audio device,

connect the included audio cable to your shuffle/audio

player’s headphone jack and than connect the audio

cable to the i.Sound® MAX’s line-in located on the back

of the i.Sound® MAX speaker.

Page 1

Page 2

3. Select music from your iPod® and press play.

Adjust the volume to a desired listening level using

the i.Sound® MAX’s volume buttons. (make sure

that your iPod’s® volume is also set to a desirable

level)

4. The i.Sound® MAX Speaker System has a battery

saving sleep mode function. If the iPod® is in

sleep mode or it’s power is off, the Max Speaker

will go to sleep mode and the green LED power

on indicator light will turn off. If the iPod® is

powered on, the Max Speaker will also power on.

In order to properly function, the Max Speaker

System requires a connected audio device that is

powered on.

5. Connecting your i.Sound® MAX to your computer

system.

• Using your existing iPod

® USB or Firewire data

cable, connect the cable to the back of the

i.Sound® MAX and the other end to your

computer system of choice.

6. Power your i.Sound® MAX speaker system on and

prepare for MAXIMUM sound, data transfer and

iPod® charging with i.Sound® MAX.

For enhanced Bass press the

bass boost button located on

the i.Sound® Max Speaker.

• AC Adapter

• iPod® Spacer Brackets

• Instruction manual

Summary of content (2 pages)

PAGE 1
Package Contents: • Main Speaker Unit • Wireless Remote Control • 3.5mm Audio Cable i.Sound MAX ® 3. Select music from your iPod® and press play. Adjust the volume to a desired listening level using the i.Sound® MAX’s volume buttons. (make sure that your iPod’s® volume is also set to a desirable level) • AC Adapter • iPod® Spacer Brackets • Instruction manual i.Sound® MAX Set-up Instructions: 1. When using the i.
PAGE 2
Remote Control Functions: Charging and Syncing Function: Volume up and down 1. Connect your exisiting iPod® USB or Firewire data/charging cable to your computer of choice and the back of the i.Sound® MAX. The backlight button awakens your iPod® from sleep mode. 2. Plug your iPod® into the MAX’s iPod® dock located at the top center of the i.Sound® MAX speaker system. A single press of the repeat button sets your iPod® into the repeat function, a second press turns off the repeat function.