Installation Guide

8PRISM PLUS manual Ver 1 Rev 2 11/2016
overhead view
Fig 6
Fig 7
23-15/16”
23-15/16”
23-15/16”
23-15/16”
W2
W1
6. Set the Stationary Glass 1 (#01) onto
the threshold and into the Stainless Steel
U-channel (#11).
See Fig 6 for details
7. Measure the distance on the threshold between the
Stationary Glass 1 (#01) and Stationary Glass 2 (hinge
panel) (#03).
Adjust the panel glass so that it is parallel to the outside
of the threshold.
Measure the area where the door glass will be installed.
This distance needs to be 23-15/16”.
Mark the position of the glass on the threshold as
shown.
See Fig 7 for details