UNIDOOR (STYLE B & C) SHOWER DOOR GLASS PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com Style B Style C Please read these instructions carefully before installing.
Model#s: SHDR-20297210 SHDR-20307210 SHDR-20317210 SHDR-20327210 SHDR-20337210 SHDR-20347210 SHDR-20357210 SHDR-20367210 Finishes: -01 Chrome UNIDOOR (STYLE B & C) Ver 2 Rev 10 09/2016 Model#s: SHDR-20417210C SHDR-20427210C SHDR-20437210 SHDR-20447210 SHDR-20457210 SHDR-20467210 SHDR-20477210 SHDR-20487210 SHDR-20477210C SHDR-20487210C SHDR-20497210 SHDR-20507210 SHDR-20517210 SHDR-20527210 SHDR-20537210 SHDR-20547210 SHDR-20537210C SHDR-20547210C SHDR-20557210 SHDR-20567210 SHDR-20577210 SHDR-20587210 SH
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
Tools Required Caulk Tape Measure Level UNIDOOR (STYLE B & C) Ver 2 Rev 10 09/2016 Pencil Phillips Screwdriver Drill bit (Ø=5/16") Caulk Gun Electric Drill Hammer Drill bit Drill bit (Ø=1/4") (Ø=1/8") Wood Mallet Knife 4
Detailed Diagrams of Shower Door Components Diagram B Diagram A 12 11 10 12 9 11 10 9 13 13 14 14 15 15 16 16 17 17 18 19 18 21 19 22 23 23 Diagram A 09 10 11 12 13 14 Wall profile Glass profile Stationary glass Support bar * Wall Anchor * Round head screw ST4.2×10 1pc 1pc 1pc 1pc 4pcs+1pc 3pcs 15 16 17 18 19 23 Big flat head screw ST4.2×40 Round head screw ST4.2×35 Decorative screw cover Bottom bracket Anti-Water strip (inline panel) Countersunk screw ST4.
NOTE: The Unidoor shower door needs to be installed prior to proceeding with the following Stationary Glass installation instructions. Please see the Single Shower Door installation manual included in the door packaging for complete shower door installation instructions. Before you begin the installation, please recheck your shower opening size. Specific size information can be found on our website at DreamLine.
Style “B” and “C”: Stationary Glass Assembly and Installation NOTE: Use parts from Diagram “A” or “B” (depending on your model style) for the Stationary Glass assembly and installation. Style B 2. Apply clear silicone along the inner channel of the Glass profile (10) and insert the Stationary glass (11) into the channel. Style C 1 2 3 4 ATTENTION: Please note that the bottom hole in the corner of the Stationary glass should be away from the Glass profile not next to it.
3. Press the Anti-Water strip (inline panel) (19) onto the vertical edge of the Stationary glass (11). Attach the Bottom Bracket (18) through the bottom hole of the Stationary glass. 1 2 inside inside outside outside See Fig. 3 for details. 3 4 2 inside inside Fig. 3 4. Carefully butt the Stationary glass (11) up against the wall vertically. outside See Fig. 4 for details. inside Fig.
5. While securely holding the Stationary glass (11) close the Glass Door and align the Stationary glass to it. Use the door mark that was made in step #1 on the threshold as a reference to ensure that the Door is perpendicular to the wall. If needed, adjust the position of the Stationary glass so that the Anti-Water strip (inline panel) (19) makes tight contact to the Glass Door from top to bottom. NOTE: The top of the Stationary glass must be leveled with the Glass door.
7. Drill the hole into the shower base or threshold for the Bottom bracket (18) using Ø 1/8” drill bit at the drill mark that was made in step #5. Use the Round head screw ST4.2x35 (16) along with a raised white washer to attach the Bottom Bracket to the shower base or threshold. Move the Stationary Glass (11) back into position and insert the Glass profile assembly into the Wall profile (09). Secure the Bottom Bracket (18) to the Stationary Glass.
8. Recheck the alignment and spacing of the Glass Door and Stationary glass (11) to make sure the Door still opens and closes correctly. After final adjustments of the Stationary glass drill the holes in the Glass profile (10) through the predrilled holes in the Wall profile (09) using an Ø 1/8” drill bit. NOTE: You only need to drill through the first layer of the Glass Profile. 2 1 Ø1/8” 3 Use Round head screws ST4.2×10 (14) to attach the Wall profile to the Glass profile.
Style “B”: Support bar Assembly and Installation NOTE: Use parts from Diagram “A” for the Support Bar assembly and installation. 10. Locate the Support bar (12). Adjust the bar to a proper position on the glass and the wall. Level it horizontally. Hold it firmly and outline the bracket’s position on the wall. Remove the Support bar and detach the wall bracket from it. Place the wall bracket against its outlined position on the wall and mark the drilling hole.
11. Apply a good quality mildew-resistant silicone along the connection of the Stationary glass to the wall and the Shower base or threshold. Allow 24 hours for the silicone to fully cure before using the shower. See Fig. 12 for details. Caulk Fig.
Style “C”: Glass Shelves* Assembly and Installation NOTE: Use parts from Diagram “B” for the Glass Shelves* assembly and installation. 12. Mark the Glass shelf* (12) position on the wall. According to the measurements in Fig. 13.1, mark the drilling holes for the Shelf brackets* (without nut) (22). Drill the holes using Ø 5/16” drill bit and insert the Wall anchors* (13). Attach the Shelf brackets* (without nut) to the wall using the Countersunk screw* ST4.
Fig. 14 13. Apply a good quality mildew-resistant silicone along the connection of the Stationary glass to the wall and the Shower base or threshold. Allow 24 hours for the silicone to fully cure before using the shower. See Fig. 15 for details Caulk Fig.
Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth.
TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
