UNIDOOR LUX Style D with Support Bar SHOWER DOOR AND INLINE PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.
©2018 DreamLine. All Rights Reserved UNIDOOR/UNIDOOR-LS/UNIDOOR LUX/UNIDOOR PLUS SINGLE SHOWER DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.
©2018 DreamLine. All Rights Reserved Style “A” (single door installation shown) with Half-Frosted Glass: NOTE: This model features the Half-Frosted glass option. The textured surface on the door glass should be installed to face outside of the shower. The door glass can be flipped for left or right-hand installation.
©2018 DreamLine.
©2018 DreamLine.
©2018 DreamLine. All Rights Reserved Models with Glass-to-Glass Hinge panels: For Glass-to-Glass Hinge Door models: Use the installation manual that is packaged with the Hinge panel glass first.
©2018 DreamLine. All Rights Reserved STYLE A UNIDOOR Single shower door 23”- 30” Refer to detailed diagram on page 12 of this manual to begin the installation.
©2018 DreamLine.
©2018 DreamLine. All Rights Reserved Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the necessary parts are included in the package(s) by checking off the components on the “Detailed Diagram of Shower Door Components”.
©2018 DreamLine.
©2018 DreamLine.
©2018 DreamLine.
©2018 DreamLine.
©2018 DreamLine.
©2018 DreamLine. All Rights Reserved Single Shower Door Assembly and Installation NOTE: The following shower door installation instructions should be used as a general guide and prerequisite to the installation of the UNIDOOR, UNIDOOR-LS, UNIDOOR LUX and UNIDOOR PLUS models. Before you begin the installation, please check your finished opening size. Specific size information can be found on DreamLine.
©2018 DreamLine. All Rights Reserved 2. The Door Glass (01) ships with four 5/8” shims attached to the top (2pcs) and bottom (2pcs). Determine the swing of your door and only remove the shims from the top of the door glass, leaving the bottom shims in place. Set the Door Glass (01) onto the threshold at the desired location and check for level.
©2018 DreamLine. All Rights Reserved 1 TIP: The PVC hinge spacer can also be used as a template to assist with marking the hinge mounting holes. 2 *Only use the PVC hinge spacer to correct for minor out-of-plumb wall conditions. 3 Fig. 4 ATTENTION: As viewed from inside the shower, the hinge plate is very close to the drilled holes in the wall and might get scratched while installing the long screws. Be careful not to scratch the hinge surfaces during installation. (OPTIONAL) 5.
©2018 DreamLine. All Rights Reserved Setting the Adjustable Hinges The Adjustable hinges are pre-set to overclose to 85º and are adjustable up to 90º after the door is installed. Once the door glass is installed, simply loosen the Allen set screws and position the door to the desired closed position. While holding the door in the new closed position, retighten the Allen screws and your door will now self-center to the chosen closed position. 5a.
©2018 DreamLine. All Rights Reserved 5b. The hinges are factory set to 85 degrees. You can change this angle by using the adjustment screws on the hinge plate. (Fig 5b) outside inside Fig 5b 5c. Use the supplied Allen Key to loosen the adjustment screws on the inside hinge plate, adjust the door to the desired angle (90 degrees for example) then retighten the adjustment screws (Fig 5c). Be sure that you create a tight seal with the supplied strike vinyl when the door is in the closed position.
©2018 DreamLine. All Rights Reserved 6. Mount the Handle (02) to the Door Glass (01). (Fig 6) Fig. 6 7. Measure the bottom of the Door Glass (01) from end to end to determine the actual width of the door. Cut the Bottom anti-water strip (07) to the size of your measurement and notch approximately 3/8” off the inner side of the Bottom anti-water strip as shown. Press the Bottom Anti-water strip (07) tightly onto the bottom edge of the Door Glass (01).
©2018 DreamLine. All Rights Reserved 1 2 7/8" Into the hinge Into the hinge 3 4 7/8" 7/8" 8. Take three measurements: from the top edge of the Door Glass (01) to the upper body of the top Hinge (05) (+) 7/8” from the lower body of the upper Hinge to the upper body of the bottom Hinge (+) 1-3/4” from the lower body of the bottom Hinge to top of the installed Bottom anti-water strip (07) (+) 1-7/8” Cut the Side strip (06) according to the measurements.
©2018 DreamLine. All Rights Reserved Fig. 10 If the model includes additional panel glass, refer to the manual that is packaged with the panel glass to continue with the installation.
©2018 DreamLine. All Rights Reserved Product Maintenance BASES and BACKWALLS: To ensure long-lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
©2018 DreamLine. All Rights Reserved TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
UNIDOOR LUX (STYLE D) SHOWER DOOR GLASS PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com Style D Please read these instructions carefully before installing.
Model #s SHDR-23297210-## SHDR-23307210-## SHDR-23317210-## SHDR-23327210-## SHDR-23337210-## SHDR-23347210-## SHDR-23357210-## SHDR-23367210-## SHDR-23377210-## SHDR-23387210-## SHDR-23397210-## SHDR-23407210-## SHDR-23417210-## SHDR-23427210-## SHDR-23437210-## SHDR-23447210-## SHDR-23457210-## SHDR-23467210-## SHDR-23477210-## SHDR-23487210-## SHDR-23497210-## SHDR-23507210-## SHDR-23517210-## SHDR-23527210-## SHDR-23537210-## SHDR-23547210-## SHDR-23557210-## SHDR-23567210-## SHDR-23577210-## SHDR-23587
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
Tools Required Tape Measure Caulk Level UNIDOOR LUX (STYLE D) Ver 2 Rev 9 09/2016 Pencil Caulk Gun Phillips Screwdriver Electric Drill Drill bit (Ø=5/16") Hammer Drill bit (Ø=1/8") Knife 4
Detailed Diagram of Panel Glass Components 12 11 13 15 16 17 18 19 The glass surface with the ClearMax™ label must be installed to face inside of the shower 20 23 24 Packing List 11 12 13 15 16 17 Stationary glass Support bar * Wall anchor * Big flat head screw ST4.2×55 Round head screw ST4.2×35 Decorative screw cover 1pc 1pc 2pcs + 1pc 2pcs 1pc 1pc 18 19 20 23 24 Bottom bracket Anti-Water strip (inline panel) Anti-water strip (enclosure)** Countersunk screw ST4.
Style “D”: 6” Small or 14”-30” Large Stationary Panel Installation NOTE: The Unidoor shower door needs to be installed prior to proceeding with the following Stationary Glass installation instructions. Please see the Single Shower Door installation manual included in the door packaging for complete shower door installation instructions. Before you begin the installation, please recheck your shower opening size. Specific size information can be found on our website at Dreamline.com.
NOTE: Use parts from “Detailed Diagram of Panel Glass Components” for the Stationary Glass assembly and installation 2. Mount the two Wall brackets (24) through the notches on the Stationary glass (11). Press the Anti-water strip (inline panel) (19) onto the vertical edge of the Stationary glass. Attach the Bottom Bracket (18) through the bottom hole of the Stationary glass. See Fig. 2 for details. 2 1 outside 3 outside 4 inside inside outside outside 2 6 5 3 inside inside Fig. 2 3.
4. While securely holding the Stationary glass (11), close the Door Glass and align the Stationary glass to it. Use the door mark that was made in step #1 on the threshold as a reference to ensure that the Door is perpendicular to the wall. If necessary, adjust the position of the Stationary glass so that the Anti-Water strip (inline panel) (19) makes tight contact to the Door Glass from top to bottom. NOTE: The top of the Stationary glass must be leveled with the Door glass.
6. Drill the hole into the shower base or threshold for the Bottom bracket (18) using Ø 1/8” drill bit at the drill mark that was made in step #4. Use the Round head screw ST4.2x35 (16) along with a raised white washer to attach the Bottom Bracket to the shower base or threshold. 1 See Fig. 6 for details. Ø 1/8" 2 outside inside Fig. 6 7. Move the Stationary Glass (11) back into position and tighten it up to the Wall Brackets (24). Secure the Bottom Bracket (18) to the Stationary Glass.
outside inside Fig. 8 ATTENTION: When installing a model with the 6” panel, skip to step #9 to complete the installation. If installing the 12” panel or larger, the Support Bar (12) must be installed for stability, continue to step #8”: 8. Locate the Support bar (12). Position the Support bar (12) at an angle to the wall that will provide adequate support for the panel glass and level it horizontally. Hold it firmly and outline the bracket’s position on the wall.
Fig. 10 9. Apply good quality mildew-resistant silicone along the connection of the Stationary glass (11) with the walls and the threshold. Allow 24 hours for the silicone to fully cure before using the shower. See Fig. 11 for details. waterproof silicone inside Fig.
Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth.
TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
