EN GHOST X Quick Guide Downloaded from www.Manualslib.
1 Thank you for purchasing the Drift Ghost X CUSTOMER SUPPORT Download the full manual and check our official website for firmware updates, customer support, and info on all of our products. https://driftinnovation.com/ If you have any suggestions, comments or concerns; please contact our customer support team at: support@driftinnovation.
Contents 3-4 About Your Camera | Package Contents 5-6 Initial Setup | Getting Started 7 Camera Modes 8 Settings Menu 9-10 11 12-13 Settings Mounting the Camera Feature Overview 14 Accessory Guide 15 Wi-Fi + Firmware 16 Connecting Your Camera 17-18 Specifications 19-20 Disclosures Downloaded from www.Manualslib.
About Your Camera 3 A A Rear Button B Middle Button C Front Button B C D E H I D Status LED E Rotating Lens F Battery Module G Module Latch H Wi-Fi LED I Rear Screen J Microphone K Reset Button L MicroSD Card Slot M 10 Pin Mini USB Port N Rubber Cover Downloaded from www.Manualslib.
Package Contents A Ghost X Camera B Universal Clip C Flat Adhesive Mount D Curved Adhesive Mount E Reset Tool F USB-Mic Converter G EN MiniUSB Cable Downloaded from www.Manualslib.
Initial Setup 5 1. 2. 3. 4. 5. Uncover the microSD slot by lifting its rubber cover. Insert a Class 10 or higher microSD/HC/XC card (up to 128GB). Format before first usage! Uncover the mini USB port by lifting its rubber cover Connect the camera via a mini USB cable to a powered USB port, and charge the battery for 2.5 hours before first use. Replace the rubber covers securely to cover both the microSD slot and mini USB port. You are ready to go! 3 4 1 Downloaded from www.Manualslib.
Getting Started EN POWER ON/OFF 1. Press and hold the button to power on. 2. The Rear Screen will power on, showing the welcome display. 3. The camera is now ready to record video or take photos. 4. Current camera mode is indicated by the colour of the Status LED and Rear Screen, along with the icon in the top left of the Rear Screen. 5. To power off, press and hold the button for 3 seconds.
Camera Modes 7 VIDEO MODE (Green LED) Press the TIMELAPSE MODE button to start (Purple LED) Press the button to capture recording. The Status LED and LCD backlight a series of still images at a specified rate. The will flash red to indicate recording. Press the Status LED and LCD screen will flash red each button again to stop recording. VIDEO SETTINGS • Resolution • Frame Rate time an image is captured. To stop recording, press the button once more.
Settings Menu EN SETTINGS MENU NAVIGATION 1. On arrival to the settings menu, the highlight black box rests on the top, highlighting the Settings Menu icon as the starting position. 2. Press the button to navigate down, this highlights the next setting. button to scroll upwards. Press hold the button to change the option for that setting. 3. Press the 4. At any time, press the button to change mode (returning to Video).
Settings 9 Wi-Fi OFF / ON Field of View 90° / 115° / 140° Exposure -2 / -1 / 0 / +1 / +2 Self Timer OFF / 3S / 5S / 10S Video Bit Rate HIGH / MEDIUM / LOW Video Filter NORMAL / VIVID / LOW LIGHT ISO 100 / 200 / 400 / 800 / AUTO Video Tagging OFF / ON Video Tagging Interval 10S / 30S / 1MIN / 2MIN Car DVR OFF / ON Car DVR Loop Interval 10S / 30S / 1MIN / 2MIN / 5MIN / 10MIN Microphone Sensitivity OFF / 1 / 2 / 3 / 4 / 5 Speaker Volume OFF / LOW / MED / HIGH Downloaded from www.
Settings EN Status Indicator LED OFF / ON Instant Record OFF / ON Date YY/MM/DD HH/mm Date Stamp OFF / ON Camera Off NEVER / 2MIN / 5MIN / 10MIN / 20MIN THM Files ON / OFF Language EN / CN Reset Settings YES / NO Format SD Card YES / NO Serial Number XXXXXX Firmware Version XXXXXX Check our official website for firmware updates. Downloaded from www.Manualslib.
Mounting the Camera 11 1. 2. 3. Attach the Universal Clip to the camera in any 360° orientation as needed – first position the clip in the desired orientation, then secure by rotating the screw base by hand. Slide the Universal Clip into your chosen mount, ensuring that it ‘clicks’ into place. *Double check it has been fully inserted by pushing out the clips. Align your shot.
Feature Overview EN 12 CAR DVR MODE This hands-off mode is ideal for insurance and security purposes. The camera records footage in a continuous loop style (DVR Intervals) recording loop after loop until it fills the MicroSD Card. Once full, the oldest loops will be deleted as the newer ones are saved. The DVR loop interval can be 10s, 30s, 1min, 2min, 5min or 10min.
13 BIT RATE Users can choose to keep the normal compression used by the H.264 codec, or if they prefer, allow a higher flow of data for preserving more of the original recording. This will result in a bigger file size. Downloaded from www.Manualslib.com manuals search engine Feature Overview FILTER Quickly tailor your cameras settings to the recording conditions with filters. Choose between Normal / Vivid / Low Light .
Accessory Guide PIVOT MOUNT Mountable anywhere at nearly any angle, the Drift Pivot Mount is your tool to capture the moment from any point of view you can imagine. Includes flat and curved adhesives, and can be used together with any other Drift mount. Downloaded from www.Manualslib.com manuals search engine HANDLEBAR MOUNT The Drift handlebar mount is the perfect accessory for riders, whatever your discipline.
15 Wi-Fi + Firmware To turn on your Ghost X Wi-Fi, simply press and hold the A green Wi-Fi indicator LED shows that Wi-Fi is enabled. Wi-Fi can also be turned on via the cameras settings menu. button. DOWNLOAD THE DRIFT LIFE APP Setup your shot, capture, playback, edit and live stream on your mobile device. INSTALLING FIRMWARE Download the latest firmware from the Drift website and copy the Ghost_X.bin file into the root of a formatted micro SD card.
Connecting Your Camera EN CONNECTING TO A PC 1. Connect the camera using the USB cable (provided); the camera screen will show a USB icon. 2. The camera’s folder may open automatically; if not, open using My Computer. 3. The camera should be recognised as a removable disk; double-click to open. 4. Open the DCIM folder to access your files. CONNECTING TO A MAC 1. Connect the camera using the USB cable (provided); the camera screen will show a USB icon. 2.
Specifications 17 Video Resolution and Frame Rates: 1080P (1920 X 1080 16:9) 25 / 30 FPS 960P (1280 x 960 4:3) 720P (1280 X 720 16:9) 25/ 30 FPS 25 / 30 / 50 / 60 FPS WVGA (854 x 480 16:9) 25 / 30 / 50 / 60 FPS File format: .MP4 (H.264 codec) Sensor type: CMOS Field-of-view (diagonal): Lens focal range: 90° / 115° / 140° 0.
Specifications EN Inputs: Mini USB 10 Pin. External Microphone via USB adaptor. Outputs: A/V and HDMI Out via USB Adapter. Connectivity: Power: USB Plug And Play, Mini USB 10 Pin. 1500mAh internal,500mAh modular battery included. Wi-Fi Frequency: 2.4GHz Camera Dimensions: 43 (W) x 82.2 (L) x 31.4 (D) mm Weight: 120g Compatibility: Windows XP and up / Mac OS 10.
19 FCC/CE Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Disclosures Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class [B] digital apparatus complies with Canadian ICES-003.
1 Merci pour acheter le Drift Ghost X SOUTIEN A LA CLIENTELE Télécharger le manuel complet et consulter le site officiel pour les misà-jour de la société, le soutien à la clientèle et les informations sur tous nos produits. https://driftinnovation.com/ Si vous avez du conseil, des commentaires ou de la préoccupation, veuillez contacter notre équipe du soutien à la clientèle au: support@driftinnovation.
Sommaire FR 3-4 A propos de votre caméra | Contenu de l’emballage Initial 5-6 Réglages initial | Commencer 7 Caméra Modes 8 Menu de paramètres 9-10 11 12-13 Paramètres Monter la Caméra Présentation des fonctionnalités 14 Guide d’accessoires 15 Wi-Fi + App 16 Connecter votre Caméra 17-18 Spécifications 19-21 Divulgations Downloaded from www.Manualslib.
A propos de votre caméra 3 A Bouton arrière B Bouton du milieu C Bouton avant A B C D E H I D L’état de LED E Lentille rotative F Module de batterie G Module de verrouillage H Wi-Fi LED I Ecran arrière J Microphone K Bouton de réinitialisation L Cran de MicroSD Carte M N Mini Port USB 10 broches Couvercle en caoutchouc Downloaded from www.Manualslib.
Contenu de l’emballage initial A Ghost X Caméa B Clip universel C Support adhésif plat D Support adhésif incurvé E Outil de réinitialisation F Convertisseur USB-Mic G MiniUSB Câble Downloaded from www.Manualslib.
Réglages initial 5 1. 2. 3. 4. 5. Découvrir le cran de microSD en soulevant son couvercle en caoutchouc. Insérer une carte microSD / HC / XC de classe 10 ou supérieure (jusqu’à 128 GB). Format avant la première utilisation! Découvrir le mini port USB en soulevant son couvercle en caoutchouc Connecter le caméra par un câble mini-USB à un port USB alimenté et charger la batterie pendant 2,5 heures avant la première utilisation.
Commencer FR 6 ALLUMER/ ETEINDRE 1. Appuyer et maintenir le bouton pour allumer. 2. L’écran arrière s’allume, affichant l’affichage de bienvenue. 3. L’appareil photo est maintenant prêt à enregistrer une vidéo ou à prendre des photos. 4. Le mode de caméra actuel est indiqué par la couleur de l’état de LED et l’écran arrière, ainsi que l’icône en haut à gauche de l’écran arrière. pendant 3 secondes. 5.
Caméra Modes 7 MODE DE VIDEO MODE DE TIMELAPSE (LED vert) Appuyer sur le bouton pour ( LED violet) Appuyer le bouton commencer à enregistrer. Le LED d’état et le pour capturer une série d’images à un rétroéclairage LCD clignotent en rouge pour taux spécifié. L’état de LED et l’écran LCD indiquer l’enregistrement. Appuyer le bouton encore une fois pour arrêter clignotent en rouge à chaque fois qu’une photo est capturée. Pour arrêter, appuyer le PARAMETRES DE VIDEO bouton encore une fois.
Menu de Paramètres FR 8 SETTINGS MENU NAVIGATION 1. A l’arrivée au menu des paramètres, la case noire en surbrillance se trouve en haut, mettant en surbrillance l’icône du menu de paramètres comme position de départ. 2. Appuyer sur le bouton pour naviguer vers le bas, cela met en surbrillance pour le le réglage suivant ; Appuyer sur le bouton; Appuyer sur le bouton faire défiler vers le haut. pour changer l’option à ce paramètre. 3. Appuyer le bouton 4.
Paramètres 9 Wi-Fi OFF / ON Champ de vision 90° / 115° / 140° Exposition -2 / -1 / 0 / +1 / +2 Retardateur OFF / 3S / 5S / 10S Débit binaire Filtres NORMAL / VIVID / LOW LIGHT ISO Sensitivité 100 / 200 / 400 / 800 / AUTO Tag Vidéo OFF / ON Tag Vidéo intervalle 10S / 30S / 1MIN / 2MIN DVR de voiture OFF / ON DVR de Interval 10S / 30S / 1MIN / 2MIN / 5MIN / 10MIN Mic Sensitivité OFF / 1 / 2 / 3 / 4 / 5 Volume d’orateur OFF / LOW / MED / HIGH Downloaded from www.Manualslib.
Paramètres FR LED Etat Indicateur OFF / ON Enregistrement instantané OFF / ON Date YY/MM/DD HH/mm Date de timbre OFF / ON Camera Off NEVER / 2MIN / 5MIN / 10MIN / 20MIN THM Files ON / OFF Language EN / CN Reset Settings YES / NO Format SD Card YES / NO Serial Number XXXXXX Firmware Version XXXXXX Verifier notre website pour les mis-à-jours du firmware Downloaded from www.Manualslib.
Monter la Caméra 11 1. 2. 3. Fixer le clip universel sur la caméra dans n’importe quelle orientation à 360 ° selon les besoins - d’abord fixer le clip dans l’orientation desirée, puis fixer-le en tournant la base de la vis à la main. Faites glisser le clip universel dans le support choisi, en assurant qu’il s’enclenche en place. * Vérifier encore une fois qu’il a été complètement inséré en poussant les clips. Aligner votre tir.
Présentation des fonctionnalités FR 12 DVR MODE DE VOITURE Ce mode de transfert est idéal pour l’assurance et la sécurité. Le métrage d’enregistrement de la caméra est dans un enregistrement en boucle continue (DVR Intervals) boucle après boucle jusqu’à ce qu’elle remplisse la carte MicroSD. Une fois remplies, les boucles les plus anciennes seront supprimées en même temps que les nouvelles seront sauvegardées. L’intervalle de boucle du DVR peut être 10s, 30s, 1min, 2min, 5min ou 10min.
13 Présentation des fonctionnalités MODE DU DEMARRAGE INSTANE L’activée du mode du démarrage instané permet à la caméra de s’allumer et de . démarrer l’enregistrement en appuyant simplement sur le bouton DEBIT BINAIRE Les utilisateurs peuvent choisir à conserver la compression normale qui est utilisée par le codec H.264 , ou bien s’ils préfèrent à autoriser un flux de données plus élevé en préservant une plus grande partie de l’enregistrement d’origine qui entraînera une taille de fichier plus grande.
Guide d’accessoires SUPPORT DE PIVOT Il peut être utilisé à n’importe où à presque n’importe quel angle, le support de pivot Drift est votre outil à capturer le moment de n’importe quel point de vue que vous pouvez imaginer; y compris des adhésifs plats et incurvés, et peut être utilisé avec tout autre support Drift. Downloaded from www.Manualslib.com manuals search engine SUPPORT DE GUIDON Le support de guidon Drift est un accessoire parfait pour les pilotes de n’importe quelle discipline.
15 Wi-Fi + App Pour allumer le Wi-Fi de votre Ghost X, appuyer simplement sur le bouton vert du Wi-Fi et maintener-le jusqu’à l’indicateur de LED indique que le Wi-Fi est activé. Le Wi-Fi peut être aussi activé par le menu des paramètres de la caméra. TÉLÉCHARGER LA DRIFT LIFE APP Configurer votre tir, capturer, lire, éditer et diffuser en direct sur votre appareil mobile. INSTALLER LE FIRMWARE Télécharger le dernier firmware du site Web Drift et copier le fichier Ghost_X.
Connecter Votre Caméra FR 16 CONNECTER AVEC UN ORDINATEUR 1. Connecter la camera en utilisant le cable USB (offrit);l’écran de camera affichera une icône USB. 2. Le fichier de camera peut s’ouvrir automatiquement; sinon utilizer Mon ordinateur. 3. La caméra doit être reconnu comme un disque amovible. double-cliquer pour ouvrir. 4. Ouvrir le dossier de DCIM pour entrer dans votre dossiers. CONNECTER AVEC UN MAC 1.
Spécifications 17 Video Resolution and Frame Rates: 1080P (1920 X 1080 16:9) 25 / 30 FPS 960P (1280 x 960 4:3) 720P (1280 X 720 16:9) 25/ 30 FPS 25 / 30 / 50 / 60 FPS WVGA (854 x 480 16:9) 25 / 30 /50 / 60 FPS Format du dossiert: .MP4 (H.264 codec) Type du senseur: Gamme de lentille focale: CMOS 90° / 115° / 140° 0.
Spécifications FR Ports Entrées: Mini-USB 10 Pin. Microphone extérieur via adaptateur USB. Connectivité: A/V et HDMI via adaptateur USB. USB Plug And Play, Batterie Internet 1500mAh, + batterie externe 500mAh inclus. Puissance: Fréquence Wi-Fi: Dimensions Caméra: Poids: Compatibilité: 18 2.4GHz 43 (W) x 82.2 (L) x 31.4 (D) mm 120g Windows XP et plus / Mac OS 10.2 et plus Il est requis un moniteur capable de lire pour la visualisation 1080P.
19 FCC/CE Information Cet appareil est conforme à la partie 15 des règles FCC. L’opération est soumise aux deux conditions suivantes: • cet appareil ne peut pas causer d’interférences nuisibles • Cet appareil doit accepter les interférences reçues, y compris les interférences susceptibles de provoquer un fonctionnement indésirable.
Divulgations mesures suivantes : Réorienter ou déplacer l’antenne de réception; Augmenter la distance entre l’équipement et le récepteur; Connecter l’équipement à une prise d’un circuit différent de celui auquel le récepteur est connecté; Consulter le revendeur ou un technicien de radio / TV expérimenté pour obtenir de l’aide. Cet appareil est conforme à la licence industrielle de Canada - normes exemptes de RSS L’opération est soumise aux deux conditions suivantes: 1.
21 Divulgations FCC EXPOSITION AUX RAYONNEMENTS Cet équipement est conforme aux limites d’exposition aux rayonnements de FCC indiqués pour un environnement non-contrôlé.Cet équipement doit être installé et utilisé dans une distance minimale de 20 cm entre le radiateur et vous. Cet émetteur ne doit pas être situé ou fonctionner conjointement avec une autre antenne ou un autre émetteur.
1 Vielen Dank für Ihren Einkauf des Drift Ghost X KUNDENDIENST Laden Sie ein vollständiges Handbuch herunter und suchen Sie unsere offizielle Webseite für Aktualisierung der Firmware, Kundendienst und Informationen zu allen unseren Produkten. https://driftinnovation.com/ Wenn Sie Vorschläge, Meinungen oder Bedenken haben; Bitte wenden Sie sich unter: support@driftinnovation.
Inhaltsverzeichnis 3-4 Über Ihre Kamera | Verpackter Inhalt 5-6 Ersteinstellung | Anfangen 7 Kameramodi 8 Einstellungsmenü 9-12 13 14-15 Einstellung Montage der Kamera Funktionsüberblick 16 Zubehöranleitung 17 WLAN+ Firmware 18 Anschließen der Kamera 19-20 Spezifikationen 21-23 Offenlegungen Downloaded from www.Manualslib.
Über Ihre Kamera 3 A A Hintere Taste B Mittlere Taste C Vordere Taste B C D E H I D E Status-LED Rotierendes Objektiv F Batteriemodul G Modulriegel H LED von WLAN I Heckscheibe J Mikrofons K Rückstelltaste F G L Taste MicroSD Kartenschlitz M 10-poliger Mini-USB-Anschluss N Gummiabdeckung Downloaded from www.Manualslib.
Verpackter Inhalt A EN Kamara Ghost X B Universaler Klipp C Flache Klebehalterung D Gebogene Klebehalterung E Rückstellung Werkzeugs F USB-Mikrofon-Konverter G Mini-USB-Kabel G F E D C B A Downloaded from www.Manualslib.
Ersteinstellung 5 1. 2. 3. 4. 5. Heben Sie den microSD-Kartenschlitz durch Anheben der Gummiabdeckung ab. Stecken Sie eine microSD / HC / XC-Karte auf der Klasse 10 oder höher (maximal 128 GB) ein. Formatieren Sie vor dem ersten Gebrauch! Öffnen Sie den Mini-USB-Anschluss, indem Sie die Gummiabdeckung anheben Schließen Sie über ein Mini-USB-Kabel an einen mit Strom versorgten USBAnschluss die Kamera an und laden Sie für 2,5 Stunden vor dem ersten Gebrauch den Akku auf.
Anfangen DE 6 EIN-/AUSSCHALTEN 1. Drücken Sie die Taste zum Einschalten an. 2. Der hintere Bildschirm schaltet sich ein und zeigt das Anfangsbildschirm an. 3. Die Kamera ist jetzt bereit, Videos aufzunehmen oder Fotos aufzunehmen. 4. Der aktuelle Kameramodus wird durch die Farbe der Status-LED und des hinteren Bildschirms angezeigt, zusammen mit dem Symbol oben links auf dem hinteren Bildschirm. für 3 Sekunden an. 5.
Kameramodi 7 VIDEOMODUS (Grüne LED) Drücken Sie die Taste ZEITRAFFER-MODUS , um Violette LED) Drücken Sie die Taste mit der Aufnahme zu beginnen. Die Status-LED , um eine Reihe von Standbildern mit einer und die LCD-Hintergrundbeleuchtung blinken bestimmten Geschwindigkeit aufzunehmen. rot, um die Aufnahme anzuzeigen. Drücken Sie die Taste erneut, um die Aufnahme zu Die Status-LED und der LCD-Bildschirm stoppen. blinken jedes Mal rot, wenn ein Bild aufgenommen wird.
Einstellungsmenü DE NAVIGATION DES EINSTELLUNGSMENÜ 1. Nach dem Eintreffen im Einstellungsmenü befindet sich das schwarze Markierungsfeld auf dem Bildschirm und hebt das Symbol des Einstellungsmenüs als Startposition hervor. 2. Drücken Sie die Taste , um nach unten zu navigieren. Dadurch wird die , um nach nächste Einstellung hervorgehoben. Drücken Sie die Taste oben zu rollen. , um die Option für diese Einstellung zu ändern. 3. Drücken Sie die Taste 4.
Einstellungen 9 Sichtfeld 90° / 115° / 140° Belichtung -2 / -1 / 0 / +1 / +2 Selbstauslöser AUS / 3S / 5S / 10S Video-Bitrate HOCH / MITTEL / NIEDRIG Videofilter NORMAL / LEBHAFT / SCHWACHLICHT ISO 100 / 200 / 400 / 800 / AUTO Video-Tagging JA / NEIN Video-Tagging-Intervall 10S / 30S / 1MIN / 2MIN / 5MIN / 10MIN Auto-DVR JA / MANUELL / NEIN Auto-DVR Loop-Intervall 1MIN / 2MIN / 5MIN / 10MIN Zeitgleiches Bild AUS / AN Zeitgleiches Bildintervall 2S / 5S / 10S / 30S / 1MIN / 2MIN / 5MI
Einstellungen DE Statusanzeige-LED AUS / AN Wi-Fi AUS / AN / IMMER AN Kopplung der Fernbedienung JA / NEIN Sofortaufnahme JA / NEIN Videostandard ALLE / NTSC / PAL / KINO Datum YYYY/MM/DD HH/mm Datumsanzeige AUS / AN Standard Startmodus LETZTE SITZUNG FORTSETZEN / VIDEO / BILD / ZEITRAFFER / SERIENBILD / VIDEO + BILD Kamera aus NEIN / 2MIN / 5MIN / 10MIN / 20MIN THM-Dateien AN / AUS Sprache EN / FR / DE / ES / IT / CN Einstellungen zurücksetzen JA / NEIN SD-Karte formatieren JA /
Einstellungen 11 WLAN AUS / EIN Sichtfeld 90° / 115° / 140° Belichtung -2 / -1 / 0 / +1 / +2 Selbstauslöser OFF / 3S / 5S / 10S Bitrate Filter HIGH / MEDIUM / LOW ISO-Empfindlichkeit NORMALES / ANSCHAULICHES / NIEDRIGES LICHT Video-Markierung 100 / 200 / 400 / 800 / AUTO Video- Markierungsintervall AUS / EIN Auto-DVR 10S / 30S / 1MIN / 2MIN Schleifenintervall von Auto-DVR AUS / EIN Mikrofonempfindlichkeit 10S / 30S / 1MIN / 2MIN / 5MIN / 10MIN Lautstärke des Lautsprechers LED-Statusa
Einstellungen FR LED-Statusanzeige AUS / EIN Sofortaufnahme AUS / EIN Datum TT/MM/JJ Datumsstempel AUS / EIN Kamera aus NIE / 2MIN / 5MIN / 10MIN / 20MIN THM-Dateien AUS / EIN Sprache EN / CN Einstellungen zurücksetzen JA / NEIN SD-Karte formatieren JA / NEIN Seriennummer XXXXXX Firmware Version XXXXXX SS/MM Suchen Sie unsere offizielle Webseite für Aktualisierung der Firmware Downloaded from www.Manualslib.
Montage der Kamera 13 1. 2. 3. Befestigen Sie den Universalen Klipp in beliebiger 360 ° Richtung an der Kamera. Stellen Sie zuerst den Klipp in der gewünschten Richtung auf und sichern Sie ihn dann, indem Sie den Schraubenfuß mit einer Hand drehen. Schieben Sie den Universalen Klipp in die gewählte Halterung und achten Sie darauf, dass er einrastet. * Überprüfen Sie, ob der Klipp vollständig eingeführt wurde, indem Sie die Klipps herausdrücken. Richten Sie Ihres Objektiv aus.
Funktionsüberblick DE 14 AUTO-DVR Dieser manuelle Modus ist ideal geeignet zu versichern und sichern. Die Kamera zeichnet sich in einem kontinuierlichen Schleifen-Stil (DVR-Intervall) auf, um Schleife-nach-Schleife aufzunehmen, bis sie die MicroSD-Karte füllt. Sobald sie voll sind, werden die ältesten Schleifen gelöscht, wenn die neueren gespeichert werden. Das DVR-SchleifenIntervall kann 10 S, 30 S, 1 Min, 2 Min, 5 Min oder 10 Min betragen.
15 Funktionsübersicht SOFORT EINSCHALTEN-MODUS Wenn der Sofort-Einschalten-Modus aktiviert ist, kann die Kamera eingeschaltet und . die Aufnahme mit einer einzigen Taste gestartet werden BITRATE Benutzer können wählen, die vom H.264-Codec verwendete normale Komprimierung zu beibehalten, oder wenn sie dies bevorzugen, ist ein höherer Datenfluss möglich, um mehr ursprünglichen Aufzeichnungen zu apeichern. Dies führt zu einer größeren Dateigröße. Downloaded from www.Manualslib.
Zubehöranleitung SCHWENKHALTERUNG Die Drift Pivot Halterung kann beinahe in jedem Winkel und überall befestigt werden und ermöglicht Ihnen die Aufnahme des Moments aus Ihrem Winkel. Flache und kurvenförmige Klebestreifen sind mit inbegriffen und funktionieren für jede weitere Drift Halterung. Downloaded from www.Manualslib.com manuals search engine LENKHALTERUNG Die Drift Lenkhalterung ist das perfekte Accessoire für Fahrer jeglicher Disziplin.
17 WLAN + Firmware Um Ihr Ghost X WiLAN einzuschalten, drück Sie einfach die Taste an. Eine grüne LED von WLAN zeigt an, dass WLAN aktiviert ist. WLAN kann auch über die Kameraeinstellungen-Menü aktiviert werden. LADEN SIE DIE DRIFT LIFE APP HERUNTER Stellen Sie auf Ihrem Mobilgerät Ihre Aufnahme, Gefangennahme, Wiedergabe, Redigieren und Übertragung vor Ort ein. INSTALLIERUNG DER FIRMWARE Laden Sie die neueste Firmware von der Webseite von Drift herunter und kopieren Sie die Datei von Ghost_X.
Anschließen der Kamera DE VERBINDUNG MIT EINEM PC 1. Schließen Sie die Kamera mit dem USB-Kabel (mitgeliefert) an. Auf dem Kamerabildschirm wird ein USB-Symbol angezeigt. 2. Der Ordner der Kamera wird möglicherweise automatisch geöffnet. Wenn nicht, öffnen Sie Meinen Computer. 3. Die Kamera soll als Wechselplatte erkannt werden. Klicken Sie zum Öffnen doppel. 4. Öffnen Sie den DCIM-Ordner, um auf Ihre Dateien zuzugreifen. VERBINDUNG MIT EINEM MAC 1.
Spezifikationen 19 Videoauflösung und Bildraten: 1080P (1920 X 1080 16:9) 25 / 30 FPS 720P (1280 X 720 16:9) 25/ 30 FPS 25 / 30 / 50 / 60 FPS WVGA (854 x 480 16:9) 25 / 30 /50 / 60 FPS 960P (1280 x 960 4:3) Datei: .MP4 (H.
Spezifikationen Eingänge: DE 20 Mini-USB 10-polig. Externes Mikrofon per USB-Adapter Ausgänge: A/V und HDMI per USB-Adapter Konnektivität: USB Plug And Play, Leistung: 1500mAh intern, 500mAh modularer Akku enthalten. WLAN-Frequenz: 2.4GHz Kameramaße: 43 (W) x 82.2 (L) x 31.4 (D) mm Gewicht: 120g Kompatibilität: Windows XP und höher / Mac OS 10.2 und höher Für die Wiedergabe von 1080P ist ein Monitor erforderlich, der die Wiedergabe ermöglicht.
21 Information von FCC/CE Dieses Gerät entspricht dem Teil 15 der FCC-Regeln. Der Betrieb unterliegt den folgenden zwei Bedingungen: (1) Dieses Gerät darf keine schädlichen Störungen verursachen, und (2) Dieses Gerät muss empfangene Störungen akzeptieren, einschließlich Störungen, die einen unerwünschten Betrieb verursachen können.
Offenlegungen den Abstand zwischen dem Gerät und dem Empfänger; Schließen Sie das Gerät an eine Steckdose an, die nicht mit dem Empfänger verbunden ist. Wenden Sie sich an den Händler oder einen erfahrenen Radio- / Fernsehtechniker. Dieses Gerät entspricht den lizenzfreien RSS-Standards der industriellen Abteilung aus Canada.
23 Offenlegungen FCC-STRAHLUNGSBELICHTUNG : Dieses Gerät entspricht den FCC-Grenzwerten für Strahlenbelastung, die für unkontrollierte Umgebung gelten. Dieses Gerät soll mit einem Mindestabstand von 20 cm zwischen dem Heizkörper und Ihrem Gehäuse installiert und betrieben werden. Dieser Sender darf nicht zusammen mit einer anderen Antenne oder einem anderen Sender betrieben werden.
1 Gracias por comprar la cámara Drift Ghost X ATENCIÓN AL CLIENTE Descarga el manual completo y visita nuestro sitio web oficial para actualizaciones de firmware, atención al cliente e información acerca de todos nuestros productos. https://driftinnovation.com/ Si tienes alguna sugerencia, comentario o pregunta, ponte en contacto con nuestro equipo de atención al cliente en: support@driftinnovation.
Contenidos 3-4 Sulla Telecamera | Contenuti della Confezione 5-6 Impostazione Iniziale | Introduzione 7 Modalità della Telecamera 8 Menu di Impostazioni 9-10 11 12-13 Impostazioni Montare la Telecamera Riepilogo sulle Funzioni 14 Guida agli Accessori 15 Wi-Fi + Firmware 16 Connettere la Telecamera 17-18 Specifiche 19-21 Informative Downloaded from www.Manualslib.
Acerca de la Cámara 3 A A Botón trasero B Botón Central C D Lente Giratoria F Módulo de la Batería G Pestillo del Módulo H LED del Wi-Fi I Pantalla Trasera J Micrófono K Botón de Reinicio M N C Botón Delantero Indicador LED de Estado E L B Downloaded from www.Manualslib.
Contenido del Paquete A Drift Ghost X B Clip Universal C Soporte Adhesivo Plano D Soporte Adhesivo Curvo E Herramienta de restaura F Convertidor USB-Micrófono G Cable Mini-USB Downloaded from www.Manualslib.
Configuración Inicial 5 1. 2. 3. 4. 5. Destapar la ranura microSD levantando la tapa de goma. Insertar una tajeta microSD/HC/XC clase 10 o superior (hasta 128GB). ¡Formatear antes de usar por primera vez! Destapar el puerto mini USB levantando la tapa de goma. Conectar la cámara a través de un cable mini USB a un puerto USB con alimentación, y cargar la batería durante 2.5 horas antes de utilizarla por primera vez.
Introducción ES 6 ENCENDIDO/APAGADO 1. Presionar y mantener el botón para encender. 2. La Pantalla Trasera se encenderá, mostrando la ventana de bienvenida. 3. La cámara ya está lista para grabar vídeos o realizar fotografías. 4. El modo actual de la cámara se indica con el color del indicador LED de estado y en la Pantalla Trasera, junto con el icono en la esquina superior izquierda de la Pantalla Trasera. 5. Para apagar, presionar y mantener el botón durante 3 segundos.
Modos de la Cámara 7 MODO DE VÍDEO (LED verde) Pulsar el botón MODO DE LAPSO para comenzar (LED violeta) Pulsar el botón para a grabar. El indicador LED de estado y la luz LCD capturar una serie de imágenes fijas a una trasera parpadearán en rojo para indicar que se velocidad específica. El indicador LED y la está grabando. Pulsar el botón para detener la grabación.
Menú de Configuración ES 8 NAVEGAR POR EL MENÚ DE CONFIGURACIÓN 1. Al llegar al menú de configuración, la celda negra destacada aparecerá en la zona superior, destacando el icono de Menú de Configuración en la esquina izquierda; la posición inicial. 2. Pulsar el botón para navegar por las opciones, lo cual destacará la siguiente configuración. 3. Pulsar el botón para cambiar las opciones de esa configuración. 4. En cualquier momento, pulsar el botón para cambiar el modo (volviendo a Vídeo).
Ajustes 9 Wi-Fi APAGADO / ENCENDIDO Campo de visión 90° / 115° / 140° Exposición -2 / -1 / 0 / +1 / +2 Temporizador automático APAGADO / 3S / 5S / 10S Velocidad de bits de vídeo ALTO / MEDIO / BAJO Filtro de vídeo NORMAL / INTENSO / POCA LUZ ISO 100 / 200 / 400 / 800 / AUTO Marcado de vídeos SÍ / NO Intervalo de marcado de vídeos 10S / 30S / 1MIN / 2MIN DVR para vehículo SI / NO Intervalo de bucle en DVR para vehículo 1MIN / 2MIN / 5MIN / 10MIN Foto simultánea APAGADA / ENCENDIDA I
Ajustes ES Indicador LED de estado APAGADO / ENCENDIDO Grabado instantáneo SÍ / NO Fecha YYYY/MM/DD HH/mm Sello de fecha APAGADO / ENCENDIDO Apagar cámara NO / 2MIN / 5MIN / 10MIN / 20MIN Archivos THM ENCENDIDO / APAGADO Idioma EN / CN Restablecer ajustes SÍ / NO Formatear tarjeta SD SÍ / NO Número de serie XXXXXX Versión del Firmware XXXXXX Downloaded from www.Manualslib.
Montaje de la Cámara 11 1. 2. 3. Fijar el Clip Universal a la cámara en la orientación 360° según se requiera – primero colocar el clip en la orientación deseada, y a continuación asegurarlo girando la base de rosca manualmente. Enganchar el Clip Universal en el soporte elegido, y asegurarse de que está correctamente colocado al escuchar el “clic”. *Comprobar de nuevo si se ha fijado completamente presionando los enganches. Alinear la toma.
Resumen de las Características ES 12 MODO DVR PARA VEHÍCULOS Este modo sin manos es ideal para propósitos de seguros y protección. La cámara graba secuencias en bucles continuos (intervalos DVR), grabando bucle tras bucle hasta que llena la Tarjeta MicroSD. Una vez llena, el bucle más antiguo se borrará a medida que otros nuevos se guardan. El intervalo de bucles DVR puede ser de 10s, 30s, 1min, 2min, 5min o 10min.
13 Resumen de las Características VELOCIDAD DE BITS Los usuarios pueden elegir mantener la compresión normal empleada por el códec H.26 o, si lo prefieren, permitir un mayor flujo de datos para preservar mejor la grabación original. Esto resultará en un archivo de mayor tamaño. Downloaded from www.Manualslib.com manuals search engine FILTRO Personaliza rápidamente la configuración de tu cámara a las condiciones de grabación con filtros. Elige entre Normal / Intenso / Poca luz / Agua.
Guía de Accesorios MONTAJE DE PIVOTE Ajustable en cualquier lugar en prácticamente cualquier ángulo, el Soporte de Eje es la herramienta perfecta para capturar el momento desde cualquier punto de vista imaginable. Incluye adhesivos plano y curvado, y puede emplearse en combinación con cualquier otro soporte Drift. Downloaded from www.Manualslib.com manuals search engine SOPORTE DE MANILLAR El Soporte de Manillar Drift es el mejor accesorio para deportistas sobre ruedas, sea cual sea su disciplina.
15 Wi-Fi + Firmware Para encender el Wi-Fi Ghost X, simplemente pulsar y mantener el botón . El indicador LED Wi-Fi estará encendido, mostrando una luz [azul] cuando el Wi-Fi está activado. El Wi-Fi también se puede activar desde el menú de configuración de la cámara, en donde también se puede encontrar una opción para encender la red Wi-Fi de forma permanente. DESCARGA DE LA APLICACIÓN DRIFT LIFE Ajuste su tiro, captura, vea, edita y transmite en vivo con su dispositivo movil.
Conectar la Cámara ES 16 CÓMO CONECTARLA A UNA PC 1. Conecte la cámara usando el cable USB (incluido). La cámara le mostrará un ícono de USB. 2. Es probable que la carpeta de la cámara se abra es a si automáticamente, si no abra la carpeta Mi PC. 3. La cámara debería aparecer como una unidad extraíble. Haga doble clic para abrirla. 4. Abra la carpeta DCIM para tener acceso a sus archivos. CÓMO CONECTARLAA UNA MAC 1. Conecte la cámara usando el cable USB (incluido). La cámara le mostrará un ícono de USB.
17 Especificaciones Técnicas Resolución de Vídeo y Frecuencia de Fotogramas: 25 / 30 FPS 1080P (1920 X 1080 16:9) 720P (1280 X 720 16:9) 25/ 30 FPS 25 / 30 / 50 / 60 FPS WVGA (854 x 480 16:9) 25 / 30 / 50 / 60 FPS 960P (1280 x 960 4:3) Formato de archivo: .MP4 (H.
Especificaciones Técnicas Entradas: ES 18 Mini USB de 10 Pin. Micrófono externo a través de adaptador USB. Salidas: A/V y HDMI a través de adaptador USB. Conectividad: USB Plug And Play Potencia: 1500mAh interna, batería 500mAh modular incluída. Frecuencia de Wi-Fi: 2.4GHz Dimensiones de la Cámara: 43 (W) x 82.2 (L) x 31.4 (D) mm Peso: 120g Compatibilidad: Windows XP y versiones posteriores / Mac OS 10.2 y versiones posteriores.
19 Declaración de Conformidad Información sobre normas por el responsable del de la FCC cumplimiento pueden Este dispositivo cumple con invalidar la autoridad del la sección 15 de las normas usuario para operar el equipo.
Declaración de Conformidad que no haya interferencias Este equipo cumple con las en alguna instalación normas industriales exentas de determinada. Si este licencia de RSS del Canadá.
21 Declaración de Conformidad EXPOSICIÓN A LA RADIACIÓN DE LA FCC: Este equipo cumple con los límites de exposición a la radiación de la FCC establecidos para un entorno no controlado. Este equipo debe instalarse y operarse con una distancia mínima de 20 cm entre el radiador y tu cuerpo. Este transmisor no debe ubicarse ni funcionar conjuntamente con ninguna otra antena o transmisor.
1 Grazie per aver acquistato la videocamera Drift Ghost X SUPPORTO CLIENTI Scaricare il manuale completo e consultare il nostro sito ufficiale per firmware, aggiornamenti, supporto clienti e informazioni su tutti i nostri prodotti. https://driftinnovation.com/ Se hai qualsiasi suggerimenti, commenti o sollecitudini, contattare la nostra squadra di supporto clienti presso: support@driftinnovation.
Contenuti 3-4 Sulla Telecamera | Contenuti della Confezione 5-6 Impostazione Iniziale | Introduzione 7 Modalità della Telecamera 8 Menu Impostazioni 9-10 11 12-13 Impostazioni Montare la Telecamera Riepilogo sulle Funzioni 14 Guida agli Accessori 15 Wi-Fi + Firmware 16 Connettere la Telecamera 17-18 Specifiche 19-21 Informative Downloaded from www.Manualslib.
Sulla Telecamera 3 A B C Pulsante Posteriore Pulsante Centrale Pulsante Frontale A LED di Stato E Lente Rotante F Modulo Batteria G Modulo per Aggancio H LED di Wi-Fi I Schermo Posteriore J Microfono K Pulsante di Resettaggio L Slot Scheda MicroSD N Porta Mini USB a 10 Pin Coperchio in Gomma Downloaded from www.Manualslib.
Contenuti della Confezione A Telecamera Ghost X B Clip Universale C Supporto Adesivo Plano D Supporto Adesivo Curvo E Strumento di Resettaggio F Convertitore USB-Mic G Cavo MiniUSB Downloaded from www.Manualslib.
Impostazione Iniziale 5 1. 2. 3. 4. 5. Aprire il coperchio dello slot per microSD sollevando il coperchio in gomma. Inserire una scheda microSD/HC/XC di Classe 10 o superiore (fino a128GB) Formattare prima dell’utilizzo! Aprire la porta mini USB sollevando il coperchio in gomma Connettere la telecamera attraverso un cavo mini USB a una porta alimentata, e caricare la batteria per 2,5 ore prima del primo utilizzo.
Introduzione IT 6 ACCENDERE / SPEGNERE 1. Tenere premuto il pulsante per accendere. 2. Si accenderà lo Schermo Posteriore, mostrando l’immagine di benvenuto. 3. La telecamera è ora pronta per registrare video o per scattare foto. 4. La modalità corrente della telecamera viene indicata con il colore del LED di Stato e dallo Schermo Posteriore, insieme all’icona in alto a sinistra dello Schermo Posteriore. per 3 secondi. 5.
Modalità della Telecamera 7 MODALITÀ TIMELAPSE MODALITÀ VIDEO (LED Verde) Premere il pulsante (LED Viola) Premere il pulsante per per catturare una serie di immagini fermi a una velocità specifica. Il LED di Stato e lo iniziare la registrazione. Il LED di Stato e la retroilluminazione LCD si lampeggeranno di rosso per indicare la registrazione. Premere di nuovo il pulsante per fermare la schermo LCD lampeggeranno con luce rossa registrazione.
Menu di Impostazioni IT 8 NAVIGARE IL MENU DI IMPOSTAZIONI 1. Una volta arrivati al menu di impostazioni, la striscia nera di selezione rimane in cima, evidenziando l’icona di Menu di Impostazioni come la posizione di partenza. 2. Premere il pulsante per navigare verso il basso, selezionando l’impostazione per scorrere verso l’alto. successiva. Tenere premuto il pulsante 3. Premere il pulsante per cambiare le opzioni di quell’impostazione. per cambiare modalità (ritornando 4.
Impostazioni 9 Wi-Fi OFF / ON Campo di Vista 90° / 115° / 140° Esposizione -2 / / -1 / 0 / +1 / +2 Timer Automatico OFF / 3S / 5S / 10S Velocità Bit ALTO / MEDIO / BASSO Filtri NORMALE / VIVIDO / LUCE BASSA Sensitività ISO 100 / 200 / 400 / 800 / AUTO Tag Video OFF / ON Intervallo Tag Video Veicolo DVR 10S / 30S / 1MIN / 2MIN OFF / ON Intervallo di Ciclo Veicolo DVR 10S / 30S / 1MIN / 2MIN / 5MIN / 10MIN Sensitività Mic OFF/ / 1 / 2 / 3 / 4 / 5 Volume Altoparlante OFF / BASSO / MEDI
Impostazioni IT Indicatore di Stato LED Registrazione OFF / ON Istantanea OFF / ON Data AA/MM/GG HH/mm Stampa Data OFF / ON Camera Spenta MAI / 2MIN / 5MIN / 10MIN / 20MIN Documenti THM ON / OFF Lingua EN / CN Impostazioni di Resettaggio SÌ / NO Formatta Scheda SD SÌ / NO Numero Seriale XXXXXX Versione Firmware XXXXXX Downloaded from www.Manualslib.
Montare la Telecamera 11 1. 2. 3. Attaccare il Clip Universale sulla telecamera in qualsiasi direzione a 360° secondo le necessità - prima posizionare il clip nella direzione desiderata, poi fissarla ruotando la vite sulla base con la mano. Far scivolare il Clip Universale nel supporto scelto, assicurando che scatti in sede. *Fare un duplice controllo se è stato del tutto inserito tirando i clip verso l’esterno. Allineare lo scatto.
Riepilogo sulle Funzioni IT 12 MODALITÀ VEICOLO DVR Questa modalità a mani libere è ideale per scopi di assicurazione e sicurezza. La telecamera registra filmati nello stile di ciclo continuo (Intervalli DVR), registrando ciclo dopo ciclo finché la Scheda MicroSD è piena. Una volta piena, i cicli più vecchi verranno cancellati mentre quelli nuovi vengono salvati. L’intervallo del ciclo DVR può essere di 10s, 30s, 1min, 2min, 5min o 10min.
13 Riepilogo sulle Funzioni VELOCITÀ BIT Gli utenti possono scegliere di mantenere la compressione normale usata da H.264 codec, oppure se preferiscono, permettere un flusso di dati più alto per conservare meglio la registrazione originale. Questo comporterebbe in una dimensione maggiore nei file. Downloaded from www.Manualslib.com manuals search engine FILTRO Personalizzare velocemente le impostazioni della telecamera per registrare in condizioni con filtro.
Guida agli Accessori ATTACCO GIREVOLE Montabile dovunque vicino a ogni angolo, l’Attacco Girevole Drift è il perfetto strumento per catturare i momenti da ogni punto di vista che si possa immaginare. Include adesivi piani e curvi, e può essere utilizzato insieme agli altri attacchi Drift. Downloaded from www.Manualslib.com manuals search engine ATTACCO MANUBRIO L’attacco manubrio Drift è l’accessorio perfetto per i ciclisti, qualsiasi sia la disciplina.
15 Wi-Fi + Firmware Per accendere la Wi-Fi del GhoST X, tenere semplicemente premuto il pulsante . Un indicatore LED verde di Wi-Fi mostrerà che Wi-Fi è stata attivata. Wi-Fi può anche essere accesa attraverso il menu di impostazioni delle videocamere. SCARICARE L’APP DRIFT LIFE Imposta le riprese, registrazioni, riproduzioni, modifiche e streaming in diretta sul dispositivo mobile. INSTALLARE IL FIRMWARE Scaricare la versione più recente di firmware dal sito Drift e copiare il file Ghost_X.
Connettere la Telecamera IT 16 CONNETTERE A UN PC 1. Connettere la telecamera usando il cavo USB (fornito); lo schermo della telecamera mostrerà un’icona USB. 2. La cartella della telecamera dovrebbe aprirsi in automatico; se ciò non accade, aprire attraverso il Computer. 3. La telecamera deve essere riconosciuta come un disco rimovibile; fare un doppio click per aprire. 4. Aprire la cartella DCIM per accedere ai file. CONNETTERE A UN MAC 1.
Specifiche 17 Risoluzione del Video e Frequenza dei Fotogrammi: 25 / 30 FPS 1080P (1920 X 1080 16:9) 720P (1280 X 720 16:9) 25/ 30 FPS 25 / 30 / 50 / 60 FPS WVGA (854 x 480 16:9) 25 / 30 / 50 / 60 FPS 960P (1280 x 960 4:3) Formato File: Tipo sensore: Campo di vista (diagonale): Messa a fuoco del lente: Rotazione del lente: Modo Foto: Esposizione: Schermo LCD: Capacità Memoria: Downloaded from www.Manualslib.com manuals search engine .MP4 (H.
Specifiche IT Ingresso: Mini USB a 10 Pin. Microfono Esterno attraverso adattatore Uscite: USB Uscita A/V con Adattatore USB Connettività: USB Collega e Usa, Mini USB a 10 Pin. Potenza: 1500mAh interna, 500mAh inclusa batteria modulare. Frequenza Wi-Fi: 2.4GHz Dimensioni Videocamera: 43 (W) x 82.2 (L) x 31.4 (D) mm Peso: 120g 18 COMPATIBILITÀ Windows XP e superiori / Mac OS 10.2 e superiori Per una visualizzazione 1080P è richiesto un monitor capace di fare riproduzione.
19 Informazione FCC/CE Questo dispositivo rispetta con la Parte 15 dei Regolamenti FCC. L’operazione è soggetta alle seguenti due condizioni: (1) Il dispositivo non deve provocare disturbi dannosi e (2) Deve accettare le interferenze ricevute, comprese quelli che potrebbero comprometterne il funzionamento. ATTENZIONE Cambi o modifiche all’unità non espressamente approvate dalla parte responsabile di conformità potrebbero far annullare l’autorità dell’utente all’operare l’attrezzatura.
Informative IT 20 IT 20 Aumentare la separazione tra l’attrezzatura e il ricevitore; normativa canadese ICES-003. Son fonctionnement est soumis aux deux conditions suivantes: Connettere l’attrezzatura a un’uscita su un circuito differente da quello il ricevitore è stato connesso. (1) Cet appareil ne peut pas causer l’intervention, et Consultare il rivenditore o un tecnico esperto in radio / TV per assistenze. Questo dispositivo è conforme agli standard RSS esenti da licenza Industry Canada.
21 Informative ESPOSIZIONE A RADIAZIONI FCC Questo dispositivo è conforme ai limiti di esposizione alle radiazioni FCC definiti per un ambiente non controllato. Questo apparecchio dovrebbe essere installato e messo in funzione ad una distanza minima di 20 centimetri tra il radiatore & il corpo. Questo trasmettitore non deve essere collocato o utilizzato in congiunzione con qualsiasi altra antenna o trasmettitore.
1 感谢购买Drift Ghost X款相机 客户支持 下载完整使用手册,在我们的官方网站关注我们产品所有的固件更新、 客户支持和其他信息。 https://driftinnovation.com/ 如果您有任何建议、评价或问题,请按下列链接联系我们的客户支持团队 support@driftinnovation.com 保修 如果产品因不当使用、意外事故、火灾、冰冻、进水、疏忽或不按照操作 指南操作等造成的损坏不保修。关于保修的详细信息参见下列链接: https://driftinnovation.com/warranty Downloaded from www.Manualslib.
目录 CN 3-4 关于您的相机|包装明细 5-6 初始设置 | 入门教程 7 相机模式 8 设置菜单 9-10 设置 11 安装相机 12-13 功能纵览 14 配件说明 15 Wi-Fi +固件 16 连接您的相机 17-18 产品规格 18-21 信息说明 | 关注我们 Downloaded from www.Manualslib.
关于您的相机 3 A A Wi-Fi 按键 B 切换按键 C 电源键/拍摄键 B C D E H I D 状态指示灯 E 旋转镜头 F 电池模块 G 模块锁 H Wi-Fi 指示灯 I LCD 屏 J 麦克风 K 复位键 L TF 卡槽 M 10 pin Mini USB口 N 橡胶盖 Downloaded from www.Manualslib.
包装明细 A Ghost X 摄像机 B 标准万用扣 C 平面3M 贴 D 弧面3M 贴 E 复位工具 F USB-麦克风转接器 G CN Mini USB 线 Downloaded from www.Manualslib.
安装 5 1. 2. 3. 4. 5. 向上拉橡胶盖打开SD卡槽。 插入Class 10的SD卡或更高的SD/HC/XC卡(最大128GB),使用前先格式化! 向上拉橡胶盖,露出Mini USB 口 用Mini USB线连接相机和USB口,在使用前充电2.5小时。 盖好SD卡槽和USB口的橡胶盖。可以开始使用了! 3 4 1 Downloaded from www.Manualslib.
开始使用 CN 6 接通/关闭电源 1. 长按 按键接通电源。 2. LCD 屏启动,显示欢迎界面。 3. 相机可以录制视频或拍照。 4. 当前相机模式通过状态指示灯和后屏的颜色表示,也可由后屏左上方的图标表示。 键3秒关闭电源。 5. 长按 模式图标 2 4 模式导航 若想改变当前的相机拍摄模式,请按此按钮 式,延时拍照模式,连拍模式,以及设置模式 Downloaded from www.Manualslib.
7 视频模式 键开始录制。状 (绿色指示灯)按下 态指示灯闪动红色,表示开始录制 。 键停止录制。 再次按下 视频设置 • 分辨率 • 帧率 照片模式 键,拍下静止图像。 按下 每拍摄一张照片指示灯和LCD屏闪动一次 红色。 拍照设置 • 分辨率 延时模式 键以规定速率拍 (紫色指示灯)按下 摄一系列静止照片。每拍下一张照片,状 态指示灯闪动红色一次。 键停止录制。 再次按下 延时设置 • 分辨率 • 延时间隔 Downloaded from www.Manualslib.
设置菜单 CN 设置菜单导航 1. 在设置菜单界面,高亮的黑色区域在上端,设置菜单高亮,为开始位置。 键一下,下移高亮光标。 2. 按 键,高亮光标向上移动。 3. 长按 键切换该设置的选项。 4. 按 5. 任何时候按下 键返回视频拍摄模式。 2 1 在本例中按下 将高亮区 域移到下一个设置,再按一 次移到‘Exposure(曝光)。 在第3步图中,按下 将 FOV(视野范围)从140°切 换到115° Downloaded from www.Manualslib.
设置 9 Wi-Fi 开/关 视野范围 90° / 115° / 140° 曝光 -2 / -1 / 0 / +1 / +2 定时 关 / 3秒 / 5秒 / 10秒 比特率 高 / 中/ 低 滤镜 正常 / 生动 / 低光 ISO 敏感度 100 / 200 / 400 / 800 / 自动 视频标记 关/开 视频标记间隔 10秒 / 30秒 / 1分/ 2分 车载记录仪 关 /开 车载记录仪循环间隔 10秒 / 30秒/ 1分/ 2分/ 5分 / 10分 麦克风敏感度 关/1/2/3/4/5 喇叭音量 Downloaded from www.Manualslib.
设置 CN 10 状态指示灯 OFF / ON 即时拍摄 OFF / ON 日期 YY/MM/DD HH/mm 时间水印 OFF / ON 默认启动模式 继续上次会话 / 视频 / 照片 / 延时拍摄 / 连拍 相机关闭 永不 / 2分 / 5分 / 10分 / 20分 THM文件 关/开 语言设置 重置设置 格式化存储卡 序列号 固件版本 英语 / 中文 是/否 是/否 XXXXXX XXXXXX 登陆我们的官方网站查看固件更新 Downloaded from www.Manualslib.
安装相机 11 1. 2. 3. 按照您的需要,将镜头夹按任意360度方向连到相机。首先,将镜头夹放在理 想的方向,然后用手转动螺钉脚进行固定。 将镜头夹滑入您选择的支架,确保其固定到位。 *请推动镜头夹,以仔细检查 它已完全插入。 调整镜头。用手转动镜头,使用镜头标记作为“上升”参考,将它与地面垂直, 以确保方向正确。 镜头标记 Downloaded from www.Manualslib.
功能纵览 CN 12 车载记录仪模式 这种不需要人工干预的模式十分方便安全的。 相机会按照记录仪间隔设置,持续的分文件录影,直到MicroSD卡录满。 一旦录满,旧视频文件将被删除,而最新的循环将被保存。记录仪间隔可为10 秒,30秒,1分钟,2分钟,5分钟或10分钟。 视频标记 一旦激活,此功能可让相机持续录影,但只有重要的镜头被“标记”时才会保存。 当进入该模式时,按 按钮,将保存之前和未来一段时间的视频。 例如,若选择30秒的视频标记间隔,相机将保存之前的30秒,以及未来的30秒, 即共计1分的“标记”镜头。 视频标记功能要求可用空间为4GB的 Class 10 micro SD卡,才可以正常运行。 即时模式 启用即时模式可开启相机。只需在关机的时候,轻按一下开机键 即可立即开始拍摄。 Downloaded from www.Manualslib.
13 比特率 用户可选择保持H.264编解码器的正常压 缩,或者按照用户喜好,可以使用更高的 数据流量,保存更多的原始记录。这样文 件会更大。 Downloaded from www.Manualslib.
配件指南 支点支架 几乎可按任意角度在任 何地点安装,Drift 支架 是您在任何可以想象出 的角度拍摄某个瞬间的 理想工具,该支架可以 和其他的任何Drift支架 组合使用。 Downloaded from www.Manualslib.
15 Wi-Fi+固件 只需按住 键即可打开Ghost X的 Wi-Fi,绿色的Wi-Fi 指示灯显示Wi-Fi可使用。也可使用相机设 置菜单打开Wi-Fi。 下载Drift生活应用APP 在您的移动设备上设置您的拍摄、图像捕捉、回放、编辑和实时播放等功能。 安装固件 从Drift网站下载最新的固件,复制Ghost_X.bin文件到已格式化的SD卡根目录。在相机 上插入SD卡,打开电源。 固件安装时,相机屏幕会显示“固件更新中”。安装完成后,相机会关闭电源。 Downloaded from www.Manualslib.
连接您的相机 CN 连接到电脑 1. 使用USB线(已提供)连接您的相机;相机屏幕会显示USB图标。 2. 相机的文件夹会自动弹出;如没有该文件夹,从我的电脑处打开该文件夹。 3. 相机应被识别为可移动硬盘;双击打开。 4. 打开DCIM文件夹可看到您的文件。 连接到苹果电脑 1. 使用USB线(已提供)连接您的相机;相机屏幕会显示USB图标。 2. 相机的文件夹会自动弹出;如没有该文件夹,使用发现功能打开它。 3. 相机应被识别为可移动硬盘;双击打开。 4. 打开DCIM文件夹可看到您的文件。 Downloaded from www.Manualslib.
规格 17 视频分辨率和帧速率: 1080P (1920 X 1080 16:9) 25 / 30 FPS 720P (1280 X 720 16:9) 25/ 30 FPS 25 / 30 / 50 / 60 FPS WVGA (854 x 480 16:9) 25 / 30 / 50 / 60 FPS 960P (1280 x 960 4:3) 文件格式: .MP4 (H.264 codec) 传感器类型: CMOS 视野范围(对角线): 镜头焦距: 90° / 115° / 140° 0.5m to 无限 镜头旋转: 330° 照片模式: 4 / 8 / 12百万像素 曝光: 自动 / 手动设定(高级用户) LCD 屏: 彩色点阵背光 LCD 存储容量: Micro SD, SDHC, SDXC 存储卡 最大128GB Downloaded from www.Manualslib.
规格 CN 18 输入: 输出: 连接: 电源: 迷你 USB 10 针。通过USB适配器外接麦克风 USB适配器接A/V输出 USB 即插即用,迷你USB10针 内部1500mAh,包括500mAh 外置电池。 Wi-Fi 频率: 相机尺寸: 重量: 2.4GHz 43 (W) x 82.2 (L) x 31.4 (D) mm 120g 适配范围 Windows XP 及以上 / Mac OS 10.2 及以上 观看1080P 视频需要有回放功能的显示屏。观看 / 编辑的 最小要求为: 8GB RAM集成显卡, 第4代 i5 and 17 Intel® Core™ 或 AMD A10-7800 APU。 GeForce® GTX™ 650, AMD Radeon™ HD 7000 系列及 以上的显卡。 由于1080P所需的大量数据处理,适应系统要求可能仍然会 导致交错或起伏的播放。 Downloaded from www.Manualslib.
声明 19 摩托车免责声明 在骑摩托车时使用相机可能导致撞车,从而可能对您自己或 他人造成严重受伤或死亡。 •注意看路,铭记骑车安全; •请勿长时间看相机; •在调整相机前,请将车停在安全的地方。 关注我们 扫一扫关注我们的官方微博 官方微博 扫一扫关注我们的官方微信 微信订阅号 Downloaded from www.Manualslib.com manuals search engine V1.0.
Find out more facebook.com/driftinnovation twitter.com/driftinnovation instagram.com/drift_innovation vimeo.com/driftinnovation DRIFTINNOVATION.COM Downloaded from www.Manualslib.