Product Manual
29 30
Blood P r essur e Q＆A
33
Maintenance31
Blood P r essur e Q＆A
Q: What causes different readings?
A: Blood pressure varies throughout the course of a day. Many
factors including diet, stress, cuff placement, etc. may affec
t
an individual's blood pressure.
Q: Should I apply the cuff to the left or right wrist? What is the
difference?
A: Either wrist can be used when testing, however, when
comparing results, the same wrist should be used.
Testing on your left wrist may provide more accurate results
as it is located closer to your heart.
Q: What is the best time of day for testing?
A: Morning time or any time you feel relaxed and stress free.
M
M
Maintenance
1. Avoid dropping, slamming, or throwing the unit.
2. Avoid extreme temperatures. Do not use outdoors.
32
34
Q: What is the difference between measuring blood pressure at
home or at a professional healthcare clinic?
A: Blood pressure readings taken at home are now seen to give a
more accurate account as they better reflect your daily life.
Readings can be elevated when taken in a clinical or medical
environment. This is known as White Coat Hypertension and
may be caused by feeling anxious or nervous.
Note: Abnormal test results may be caused by:
1. Improper cuff placement
Make sure cuff is snug-not too tight or too loose.
2. Improper body position
Make sure to keep your body in an uprig
ht position.
3. Feeling anxious or nervous
Take 2-3 deep breaths, wait a few minutes and resume
testing.
M
M
3. When cleaning the unit, use a soft fabric and lightly wipe with
mild detergent. Use a damp cloth to remove dirt and excess
detergent.
4. Do not soak cuff in water! Cuff Cleaning: Apply a small
amount of rubbing alcohol to a soft cloth to clean cuff's
surface. Use a damp cloth (water-based) to wipe clean.
Allow cuff to dry naturally at room temperature.
Maintenance
5. Do not use petrol, thinners or similar solvents.
6. Remove batteries when not in operation for an extended
period of time.
M
M
7. Do not disassemble product.
8. It is recommended the performance should be checked every
2 years.
9. Expected service life: Approximately three years at 10 tests
per day.
Maintenance