Vented Gas Fireplace Installation And Operating Instructions

ELATION Fireplace Insert 18
SURROUND ASSEMBLY
LOUVRE
MOUNTING
HOLES
1. Lay parts A, B and C on a flat, non marking surface. Fasten these together with the ½ “ bolts
and nuts supplied (D).
2. Position the three trim pieces over the surround and connect the ends with corner brackets
(E). Ensure the mitered corners fit evenly before tightening down. (Note: brackets “E” come
in 2 parts - the blank brackets go under the set screws).
3. Attach the louvres to the mounting holes with screws provided