Use and Care Manual

ManualsBrandsDRYLOK ManualsConcrete CoatingsHD-9000 Professional 5 gal. White Flat Latex Interior/Exterior Basement and Masonry Waterproofer

A SIKA COMPANY

PRODUCT DATA SHEET

Publication Date: 9-20-2023

DRYLOK

HD-9000

Masonry Waterproofer

PRODUCT DESCRIPTION

DRYLOK® HD-9000 is a professional grade masonry

waterproofer featuring Flexible Encapsulated Polymers

that protect the masonry surface and aesthetic integrity

by providing a waterproof barrier to water movement into

or out of the structure. DRYLOK® HD-9000 is specially

formulated to resist mildew growth on the dry paint lm with

the incorporation of a biocide. DRYLOK® HD-9000 is ideal

for basements, stucco, masonry pools, cinder block, poured

concrete, and more. An extensive tintable color palette makes

DRYLOK® HD-9000 a one-step solution for waterproong

and beautication. Tested to ASTM D-7088 Resistance to

Hydrostatic Pressure and ASTM D-6904 Resistance to Wind

Driven Rain. When applied properly, DRYLOK® HD-9000 will

hold back 15 PSI, equivalent to a wall of water 33 feet high and

140 mile per hour wind-driven rain penetration on masonry’s

positive and negative sides. Fully transferable 18-year

warranty*.

• White, smooth nish

• Resists mold & mildew growth on the dry paint lm

• Resists 15 PSI, equivalent to a wall of water 33 ft. high

• Category 4-resists 140 MPH wind-driven rain

• Fully transferable 18 year warranty

• Guaranteed to stop water, even under pressure

• Features exible encapsulated polymers

• Tintable

TECHNICAL DATA

COMPOSITION: Latex base

SHEEN: N/A

% WEIGHT SOLIDS: 60 ± 2

DENSITY (LBS./US GAL.): 9.47 ± 0.2

COVERAGE

1st Coat: 75 sq. ft./gal.

2nd Coat: 75–100 sq. ft./

gal.

COATS

Recommended

DRY TIME

2-3 hours

Recoat: 2 hours

CLEAN-UP

Soap and water

Dispose of contaminated

absorbent, container,

and unused contents

in accordance with

local, state, and federal

regulations.

Summary of content (4 pages)

PAGE 1
PRODUCT DATA SHEET Publication Date: 9-20-2023 DRYLOK® HD-9000 Masonry Waterproofer P RODUCT DESCRI PT I ON COVERAGE 1st Coat: 75 sq. ft./gal. 2nd Coat: 75–100 sq. ft./ gal. 2 COATS Recommended DRY TIME 2-3 hours Recoat: 2 hours DRYLOK® HD-9000 is a professional grade masonry waterproofer featuring Flexible Encapsulated Polymers that protect the masonry surface and aesthetic integrity by providing a waterproof barrier to water movement into or out of the structure.
PAGE 2
DRYLOK® HD-9000 VISCOSITY: 110-120 Ku @ 77ºF pH: 9.0-9.9 COLOR: • White - ready mixed formula • 1 ready mixed color DRY TIME: • 2-3 hours • To recoat: 2 hours • Top coat with latex paint: 24 hours Note: Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail. Note: When painting the inside of concrete nonpotable watertanks, allow to dry at least 1 week before putting into service. COVERAGE: • 1st Coat: 75 sq. ft./gal. • 2nd Coat: 75–100 sq. ft./gal.
PAGE 3
DRYLOK® HD-9000 temperatures must be 50°F (10°C) or higher. Apply DRYLOK® HD-9000 directly on bare masonry. 2 coat application is required (17 wet mils). For spray specs, visit www.DRYLOK.com. If sprayed or rolled, back brush the first coat to fill any pinholes in the masonry. If brushed, work the DRYLOK® HD-9000 into the pores of the masonry, making sure to fill all pores and pinholes (see COVERAGE). The second coat may be applied by the same methods.
PAGE 4
DRYLOK® HD-9000 L IM I T E D W A RR ANTY product container and sales receipt to UGL, Technical Customer Service, 1396 Jefferson Ave., Dunmore, PA, 18509. THIS LIMITED WARRANTY EXCLUDES ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE. UGL will in no event be liable for any incidental or consequential damages.