Instructions / Assembly

Installation (continued)
8
Care and Cleaning
Troubleshooting
□ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
□ To clean the xture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or
slightly dampened, clean cloth to wipe the exterior surface of the xture.
Problem Possible Cause Solution
The lights will not turn on. The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is turned on.
There is a faulty switch. Test or replace the switch.
There is a faulty wire connection. Check the wiring.
The fuse blows or the circuit breaker
trips when the light is turned on.
There are crossed wires or the power
wire is grounding out.
Discontinue use of the lamp. Check the wire connections.
Contact a qualied electrician or call the Customer
Service Team at 1-800-388-6141 ext. 216. For customer
service and the fastest response, please email us at
[e-mail].
□ Install the light bulbs (not included) into the sockets. Use six 60W maximum medium base (E26) type “ST64” bulbs (recommended).
8
Installing the light bulbs
NOTE: You can also use six 60W maximum medium base (E26) type "A" bulbs or 9W maximum medium base (E26) self-
ballasted LED bulbs (sold separately). Do not exceed the recommended wattage.
J