User`s manual

* * Home Central Audio System

Ø Both AM and FM bands have up to 40 stations for selection, and the number refers to the

storage number of a station. Stations tuned in to and stored to numbers during manual tuner

operation can be called directly at the scheduled time.

Ø Select the “OK” button to apply and exit.

5.1.8 Zone setting:

Turn the digital wheel to highlight the “Zone setting” option, and press it once to access the “Zone

timer setting” interface (as shown in Fig. 5-1-5), where a zone can be selected to set its volume and

source.

Ø Selection of zone: Turn the digital wheel to highlight the content in the box following the

“Zone”, and then press down the wheel once to show the icon. Turn the wheel to select,

and press it again to apply and exit.

Ø Adjustment of volume: For details, refer to the “Adjustment of volume” section in page 5.

Ø Selection of source: Select the source in the same way as selection of zone. When the “…” is

selected, the default setting is selected; when the “Off” is selected, the zone is off at the

scheduled time. This operation is used for selection of up to 6 audio sources, and all zones can

use one source or different sources. If setting as described in sections 5.1.6 or 5.1.7 in page 10

is not done when source MP3 player or tuner is selected, the zone is in mute mode at the

scheduled time. If the MP3 or tuner is playing before the scheduled time, and no setting is done

for MP3 or tuner in the schedule, the MP3 player or tuner will keep playing the program which

is played before the scheduled time is reached.

Ø Default: If it is set as default setting, the audio source status of the schedule is the same as the

one executed previously.

Ø Select the “OK” button after setting to apply and exit from the zone timer setting interface.

5.1.9 Delete: To delete an existing schedule.

5.1.10 Delete all: To delete all existing schedules of the day selected (e.g. Wed).

5.2 Time setting

Turn the digital wheel to highlight the “Time setting” option in the “Operation options” interface,

and press it to access the “Time setting” interface (as shown in Fig. 5-2 in the next page). Turn the

wheel to highlight the desired option, and then press it to show the icon. Turn the wheel to

Zone timer setting

Default

MP3

Zone

Volume

Program

(Fig. 5-1-5)

Tuner timer setting

Band

Cancel

Station

(Fig. 5-1-4)