Owner's Manual

NSC0620-V01
(if applicable)
Slide the radio into the mounting sleeve to secure the radio.
With the unit on, long press DISP to display clock time. Press and
hold DISP until the hours or minutes begin to flash, then
release. Rotate the volume knob to adjust the time.
Long press DISP to finish the clock setting.
Press RELEASE and pull away from the left side to
remove. To re-install, insert right side of faceplate
first then push left side to secure.
Snap trim ring into place.
Gray
Gray/Black
Quick Start Guide
XRM69DBT
To download the complete,
model-specific manual, please visit
www.dualav.com/support/manuals.php
or call 1-866-382-5476,
9AM-5PM EST (Monday-Friday).
Digital Media Receiver
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio technician for help.
Dual Electronics Corp.
Toll Free: 1-866-382-5476
Monday-Friday, 9AM-5PM
www.dualav.com
©2020 Dual Electronics Corp. All rights reserved.
Limited One-Year Warranty
This warranty gives you specific legal rights. You may also have other rights which
vary from state to state. Dual Electronics Corp. warrants this product to the original
purchaser to be free from defects in material and workmanship for a period of
one year from the date of the original purchase. (Note that select marine products
carry a 2-year warranty. Please visit www.dualav.com for details.) Dual Electronics
Corp. agrees, at our option, during the warranty period, to repair any defect in
material or workmanship or to furnish an equal new, renewed or comparable
product (whichever is deemed necessary) in exchange without charges, subject
to verification of the defect or malfunction and proof of the date of purchase.
Subsequent replacement products are warranted for the balance of the original
warranty period.
Who is covered? This warranty is extended to the original retail purchaser for
products purchased and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship
in this product. The following are not covered: installation/removal costs, damage
resulting from accident, misuse, abuse, neglect, product modification, improper
installation, incorrect line voltage, unauthorized repair or failure to follow
instructions supplied with the product, or damage occurring during return shipment
of the product.
What to do?
1. Before
you call for service, check the troubleshooting guide in your owner’s
manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period, you must carefully pack the
product (preferably in the original package) and ship it by prepaid transportation
with a copy of the original receipt from the retailer to an authorized service
center.
3. Please describe your problem in writing and include your name, a return UPS
shipping address (P.O. Box not acceptable), and a daytime phone number with
your shipment.
4. For more information and for the location of the nearest authorized service center
please contact us toll-free at 1-866-382-5476 or by email at [e-mail].
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any
and all other warranties, expressed or implied, including without limitation the
implied warranties of merchantability and fitness for a particular purpose and any
obligation, liability, right, claim or remedy in contract or tort, whether or not arising
from the company’s negligence, actual or imputed. No person or representative is
authorized to assume for the company any other liability in connection with the sale
of this product. In no event shall the company be liable for indirect, incidental or
consequential damages.
Preparation
Pairing
Faceplate Removal
a New
Device
To download the complete Owner’s Manual for your radio,
please visit www.dualav.com/support/manuals.php.
Bluetooth
®
Before using a Bluetooth device, it must be paired and
connected. Ensure that Bluetooth is activated on your
device before beginning the pairing process.
The head unit broadcasts the pairing signal constantly
when no devices are connected. Complete the pairing
sequence from your Bluetooth device. Refer to the
owner’s manual for your device for more details.
The device name is "Dual Media Player"
The Bluetooth passcode is "1234”
Streaming Audio
Troubleshooting
• Press
ll
to skip to the next available audio track.
• Press
nn
to skip to the previous audio track.
• Press
l
/ II to toggle between play and pause during
playback.
Note: If passcode "1234" does not pair your device to
the receiver, use passcode "0000".
Note: The head unit can be in any mode of operation
when pairing is performed.
The head unit supports A2DP wireless streaming audio
from a Bluetooth mobile device directly to your head unit.
The following functions can be used to control the music:
Operation
The Dual Smart App is the ultimate wireless remote control for your
receiver. You can download Dual Smart app from Apple App Store or
Google Play Store and install it on your smartphone or tablet.
Please scan the following QR code to download Dual iPlug P2 App to
your smart phone.
APP Operation
Voice Activation Operation
Bluetooth should be paired between your smartphone and the receiver.
Press the voice activation button , and the receiver will switch into Bluetooth mode,
This will activate Siri
®
or Google Assistant
TM
on your smartphone. You will need to manually
switch back to the previous or desired mode once this operation is terminated.
Removal Keys
Step 4:
Remove the trim ring and use
the removal keys
to remove the unit.
Volume knob
,then press
BAND/DISP
Touch PS to recall each preset station that has been stored in
memory for each band.
(Available with the Dual Smart Remote App only)
Press and hold for 2 secs and
Press momentarily to change radio
release it to auto seek to previous or next strong station.
frequency down or up one step at a time.Press and hold
for 3 secs to advance quickly and
release it to stop on the desired station.
The reset hole is behind the front panel.