User Guide

49
E
900 instrument panel (fig. 35.2)
Disassemble the instrument panel by unscrewing the
two fastening screws with washer.
Disconnect the odometer cable (6) and the main wiring
connector (7). Undo the four cap nuts (8) fastening the
rear cover.
Remove the instrument panel and the rear cover.
Replace the burnt bulb with one with equal rating.
Note
Test the new bulb before refitting the instrument
panel elements.
7
6
8
900
fig. 35.2
2
A
1
Turn indicators (fig. 36)
Remove the screw (1) and detach the glass (2) from the
body.
The bulb is of the bayonet-type: press and rotate anti-
clockwise to remove. Fit the spare bulb by pressing and
turning clockwise until it clicks. Refit the glass sliding the
small tab (A) into the suitable slot in the indicator body.
Tighten the screw (1).
fig. 36