User Guide

2
fig. 49.2
76
E
3
fig. 49.1
Installing the bags (fig. 49.3)
Before fastening the bag to the motorcycle, be sure to
remove the shoulder strap (5, fig. 47.2), if you have used
it, and put it back into the inner compartment. Check that
the rear flap is neatly folded and strapped down (4, fig.
48.4). Position the bag as shown in fig. 49.1, then push it
down until you hear the bottom stud (3) click in place into
the lower catch.
Rotate the bag toward the tail of the motorcycle until
hearing the two studs (2, fig. 49.2) engage with their
catches. Fit the key (1) into the lock on the bracket and
turn it 1/4 turn. Turn the key clockwise in the LH bracket
lock, anticlockwise in the RH bracket lock. Make sure the
lock latch (4) has engaged its seat in the bag catch. Take
the key out of the lock.
CITY CITYDARK