User Guide

79
E
1
Windproof cover (fig. 51)
Removal
Undo the two screws (1) securing the windproof cover to
its supports. Remove the fork-type couplings from the
rubber collars.
Refitting
Insert the fork-type couplings into the relevant rubber
collars. Stand before your motorcycle and make sure that
the windproof cover is centered with the headlamp (fig.
51). If not, adjust the windproof cover.
Tighten the screws (1) and make sure the windproof
cover is properly positioned.
900S
fig. 51