Owner's manual
7
Setting up
Install the projector according to the environment and manner the projector will be
used in.
Arrangement
Refer to the illustrations and tables below to determine screen size and projection
distance.
The values shown in the table are calculated for a full size screen: 1024 x 768
a Screen size (diagonal) b Projection distance (±8%)
c1 , c2 Screen height
Setting up
a
c2
c1
b
a
c2
c1
b
On a horizontal surface
Suspended from the ceiling
• Keep a space of 30 cm or more between the sides of the projector and other
objects such as walls.
• For the case of installation in a special state such as ceiling mount, the
specied mounting accessories (64) and service may be required. Before
installing the projector, consult your dealer about your installation.
• The screen position may shift after installation if the projector is suspended
from the ceiling or other location due to the exibility of the plastic projector
body. If readjustment is necessary, consult with your dealer or service
personnel.
• The projected image position and/or focus may change during warm-
up (approx. 30 minutes after the lamp is turned on) or when the ambient
conditions change. Readjust the image position and/or focus as necessary.
Screen size
(diagonal)
b
Projection distance
c1
Screen height
c2
Screen height
type(inch)
m m inch m inch m inch
60 1.5 0.683 27 0.279 11 1.193 47
70 1.8 0.805 32 0.314 12 1.381 54
80 2.0 0.927 36 0.350 14 1.569 62
90 2.3 1.049 41 0.385 15 1.757 69
100 2.5 1.170 46 0.421 17 1.945 77
a