Installation Guide

Turn off Hot and Cold water
supplies before beginning.
Secure faucet to sink using
washers and locknut provided.
Use optional mounting screws
if unable to tighten locknut due
to space limitations.
Connect end of spray hose
under sink to stainless steel
hose on faucet.
With Hand Spray seated
in spray holder, install
weight assembly onto
spray hose by slipping
weight over the hose.
Attach stainless steel water
supply hoses to water
supplies with appropriate
connectors. Connect left
tube to hot and right tube
to cold. Test faucet by
turning on water supplies
and checking all connec-
tions for leaks.
Step 1
Installation Instructions
Step 2 Step 3 Step 4
Pull hand spray from spray holder and direct spray into
sink. Operate faucet handle up and down in COLD and HOT
into Spray Holder and operate handle and check all connec-
tions for leaks. Check Hand Spray operation. Push button for
gentle spray. Push button again for aerated stream.
Step 5
Maintenance/
Cleaning Instructions
Cleaning Tips:
designed to retain its beautiful sheen for years.
little care and caution should be used. We
recommend the use of mild soap and water
to clean the faucet. THE USE OF ABRASIVE
CLEANERS MAY SCRATCH THE FINISH.
Mounting with
Deck Plate
Mounting without
Deck Plate