Safety Data Sheets (SDSs) Safety Data Sheets (SDSs) Client Shenzhen Kinlan Technology Limited 3F, Building A4, Yinlong Industrial Park, ShenShan Road, Longgang Add. of Client District, Shenzhen, Guangdong, China Description POLYMER LI-ION BATTERY (900mAh) Model /Type 054240 Manufacturer Shenzhen Kinlan Technology Limited Add. of 3F, Building A4, Yinlong Industrial Park, ShenShan Road, Longgang Manufacturer District, Shenzhen, Guangdong, China Nominal Voltage 3.7V, 900mAh, 3.
Safety Data Sheets (SDSs) 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Identifier Product name: POLYMER LI-ION BATTERY (900mAh) Model: 054240 Other means of identification Synonyms:none Recommended use of the chemical and restrictions on use Recommended Use:Used in portabl electronic equipments; Uses advidsed against: a) Do not dismantle, open or shred secondary cells or batteries. b) Do not expose cells or batteries to heat or fire.
Safety Data Sheets (SDSs) Fax: 0086-0755-83938415 Postcode: 518000 E-mail address: info@kinlan.cn Emergency telephone number Company Emergency Phone Number: 0086-0755-83938415 2. HAZARDS IDENTIFICATION Classification No harm at the normal use.
Safety Data Sheets (SDSs) Hazards not otherwise classified (HNOC) Not Applicable Other information No information available. 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical characterixation: Mixtures Description: Product: Consisting of the following components. Common Chemical Name Concentration (%) CAS Number EC No. Lithium Cobalt Oxide (LiCoO2) 36.27 12190-79-3 235-362-0 1,1-Difluoroethylene polymer 1 24937-79-9 ---- Graphite (C) 18.
Safety Data Sheets (SDSs) Inhalation Move to fresh air. If symptoms persist, call a physician. Ingestion Do NOT induce vomiting. Drink plenty of water. If symptoms persist, call a physician. Most important symptoms and effects, both acute and delayed Swallowing Do not induce vomiting. Get medical attention. Most Important Symptoms/Effects No information available. Indication of any immediate medical attention and special treatment needed Notes to Physician Treat symptomatically 5.
Safety Data Sheets (SDSs) Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Methods and material for containment and cleaning up Methods for Containment Prevent further leakage or spillage if safe to do so. Methods for Cleaning up Use personal protective equipment. Dam up. Cover liquid spill with sand, earth or other Non combustible absorbent material.
Safety Data Sheets (SDSs) Engineering Measures Showers Eyewash stations Ventilation systems Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Ensure adequate ventilation. Individual protection measures, such as personal protective equipment Eye/Face Protection: Tightly sealed goggles Body protection: Protective work clothing.
Safety Data Sheets (SDSs) Evaporation rate Not determined. Flammability (solid, gas) Not determined. Upper/lower flammability or explosive limits Not determined. Vapor Pressure: Not determined. Vapor Density: Not determined. relative density: Not determined. Solubility in Water: Not determined. Solubility in other solvents Not determined. n-octanol/water partition coefficient Not determined. Auto-ignition temperature Product is not self-igniting.
Safety Data Sheets (SDSs) 12. Ecological Information Toxicity: Acquatic toxicity: No further relevant information available. Persistence and degradability: No further relevant information available. Bioaccumulative potential: No further relevant information available. Mobility in soil: No further relevant information available. Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable. Other adverse effects: No information available. 13.
Safety Data Sheets (SDSs) The packaging shall be adequate to avoid mechanical damage during transport, handling and stacking. The materials and pack design shall be chosen so as to prevent the development of unintentional electrical conduction, corrosion of the terminals and ingress of moisture. Meets requirements of DOT Special Provision 188 to be transported as non-dangerous goods Meets the requirements of 49CFR173.