MODEL / MODÈLE / MODELO: 10ILH300-01 Français P.11 Español P.20 www.tsicustomerservice.com 1-800-318-9373 Twin-Star International, Inc; Delray Beach, FL 33445 Made in China • Printed in China • Fabriqué en China • Imprimé en Chine • Fabricado en China • Impreso en China A524 1 www.tsicustomerservice.
IMPORTANT INSTRUCTIONS When using electrical appliances basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns do not let bare skin come into contact with hot surfaces. If provided, use handles when moving this appliance.
GETTING STARTED 1. The serial number is located on the back of the lantern. The serial number is necessary for product warranty registration and customer service. MOVABLE HEATER/ MEUBLE CHAUFFANT/ CALENTADOR DE MUEBLES 10ILH300-01 120V ~, 1500W, 60Hz Twin-Star International, Inc. www.twinstarhome.com CONFORMS TO UL STD. 1278 CERTIFIED TO CSA C22.2 NO.46 EN CONFORMITÉ AVEC LA NORME UL 1278 CERTIFIÉ CSA C22.2 NO 46 CONFORME A UL STD.1278 CERTIFICADO POR CSA C22.2 N.
INSTALLATION INSTRUCTIONS 1. 2. 3. 4. The bolts are found under the top edge. Remove 4 bolts by hand. Remove the cover from the lantern. Place black or white decorative rocks around the base of the candle. Re-attach cover in reverse order. 2 Black Rocks 3 White Rocks 1 A524 4 www.tsicustomerservice.
OPERATING INSTRUCTIONS Control Panel Back view The lantern can be operated by either the remote control or the control panel. A524 5 www.tsicustomerservice.
OPERATING INSTRUCTIONS FUNCTION POWER ICON DESCRIPTION The POWER button supplies power to all of the functions of the fireplace. The power button will put the insert in a standby mode. This will turn off all functions at once but will hold the settings in the memory. By pressing the power button again the unit will turn on at the same settings.
TROUBLESHOOTING Problem Root Cause Candle light flashing. Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater for 30 minutes and allow it to Manual Reset overheat cool down. Replug, operate and monitor the heater for signs of protection has triggered. overheating. If the problem continues, discontinue use of the heater and contact customer service. The heater is taking a long Location. time to reach desired room temperature.
REPLACEMENT PARTS Part 1 Part Name Ring handle Part Number Y16-S175-RH-BRZ 2 Downlight Circuit Board Y16-S175-P49 3 Candle Light PCBA Y16-S175-CLP 4 Base Assembly Y16-S200-BS 5 Remote Control P137 1 3 2 4 5 CARE AND MAINTENANCE • Clean the trim using a soft cloth, slightly dampened with citrus oil based product. Buff with a clean soft cloth. • DO NOT use brass polish or household cleaners as these products will damage the metal trim.
FCC/IC INFORMATION Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1-YEAR LIMITED WARRANTY The manufacturer warrants that your new Lantern is free from manufacturing and material defects for a period of one year from date of puchase, subject to the following conditions and limitations. 1. Install and operate this Electric Appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.