Specification Sheet

Toilet floorstanding for SensoWash®Toilet floorstanding for SensoWash® DimensionDimension WeightWeight Order numberOrder number
back-to-wall, washdown model, hardware included, horizontal
outlet, only in combination with SensoWash, connecting
elements for SensoWash with concealed connections included,
cUPC® listed*
ColorsColors
00 White 20 HygieneGlaze (an antibacterial ceramic glaze that
provides almost indefinite effectiveness)
VariantVariant
© 1.6/0.8 gpf 14 5/8" x 23 5/8" Inch 63.9 lb 216959..92
InfoboxInfobox
In-wall tank and actuator plate are required for installation / Refer to page XXX, * Complies with following
standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, 1/2" drop-ear elbow is necessary for installation (not
included with delivery)
Sanitary ceramics with the special WonderGliss surface finish will remain clean and attractive-looking for a long
time to come.
When ordering WonderGliss please add a "1" as eleventh digit to the model number.
Connecting set in combination with SensoWash shower-toilet
seat
100691
Pre-installation set in combination with SensoWash, for in-wall
carrier with horizontal support without shower toilet pre-
installation/condiut pipe
005072
Vario connector set incl. offset Ø 4 3/8" Inch 3.3 lb 001422
ME by Starck Toilet floorstanding for SensoWash® # 216959..92 |< 14 5/8" Inch >|