Instruction manual

10 Optional equipment
10.1 Seam center guide
General information
The seam center guide serves as guiding aid when topstitching.
It is used for guiding the center of two seams with equal distance so
that the distance to the left and to t he right needle is equal.
Attention!
The pressure for the seam center guide must not exceed 3 bar.
Check the pressure at the manometer 1 and set it using the
turning handle 2.
–
To set the contact pressure pull out the tur ning handle 2 of the
pressure regulating valve of the seam center guide and turn it.
In clockwise direction= to increase t he contact pressure
In counter-clockwise direction = to reduce the contact pressure
38
21