Instruction manual

6.8.2 Attaching and connecting the sewing light transformer (optional equipment)

–

Remove the machine’s mains plug!

–

Connect the mains cable of the sewing light transformer to the

mains input side of the control unit.

Caution !

The sewing-light transformer is directly connected to the mains.

It is therefore live even when the main switch is switched off.

The mains plug must be removed before carrying out any work

on the sewing-light transformer, e.g. changing the fuse.

6.8.3 Connection to the DA321G control unit

–

Loosen the 4 screws on the front plate of the controls.

–

Remove the front plate.

–

Push the cable from the back through the cable duct 1 into the

control unit.

–

Remove the black rubber grommet 2.

–

Push through the round opening of the rubber grommet with a

screwdriver.

–

Guide the cable of the sewing light transformer through the

resulting opening in the rubber grommet.

–

Inserttherubbergrommetagain.

–

With a small screwdriver press on the terminal openings 4 and 3 to

open the terminals 5 and 6.

–

Connect the blue cable to terminal 6 and the brown cable to

terminal 5.

–

Fasten the front plate with the 4 screws again.

26 5 1

654 3