Operation Manual

3.3 Sewing equipment special

Machine with edge trimming

When changing a sewing category, it is also necessary to replace a throat plate insert (it can be bought

additionally). At the same time, when the insert is replaced, the edge width of the trimmed material is

changed too, so it is necessary to change the lateral setting of the trimming knife (Service manual, section

8.4).

Sewing category 3

Trimming distance/mm 2,0 2,4 3,0

Maximum stitch length 5

Maximum sewing speed 2000

Maximum lifting of standard knife 2,4

Throat plate 0888 201240

Throat plate insert S080 811809 S080 811803 S080 811805

Upper knife S080 870235 (S080 870238, S080 870239)

It is possible that it will be necessary to limit the sewing speed (or machine speed) when trimming,

dependent on the set stitch length and material to be trimmed, to be able to achieve the required sewing

quality.