Operating Guide

11
Check fuel switch
Make sure the fuel select switch is set to GAS
6.
Open choke
The choke lever is located to the left of the panel. Push in
to open the choke and increase air into the carburetor for
normal running.
8.
Connect devices
Connect your devices to the receptacles on the front panel.
Start with the largest loads rst.
10.
Start generator
The key switch is located on the left side of the front power
panel. Insert the key and turn to the start position to start
the generator. Allow the key to return to the run position
once started.
7.
Turn breaker on
The breaker is located on the right side of the front power
panel. Flip the breaker up to allow power to ow to the
receptacles.
9.