Operating Guide

9. Ground

Terminal

3. 120V 3 Prong

Twist Lock

1. Propane Connector

GENERATOR COMPONENTS

14. Oil Fill and Dipstick

1. Propane Connector – Connects the LPG tank to the LPG Regulator.

2. Engine Switch – 3 Position Switch to “Start”, “Run”, or turn “O” the generator.

3. 120v 3-Prong Twist Lock - Use to connect electrical devices that run 120 Volt, 60 Hz, single

phase, AC current (L5-30).

4. Fuel Select Switch - Use to select generator fuel source.

5. 120v 3-Prong Receptacle - Use to connect electrical devices that run 120 Volt, 60 Hz, single

phase, AC current (NEMA 5-20).

6. Digital Volt Meter/Hour Meter - Provides reading of voltage output and tracks operating

hours.

7. Circuit Breaker - Resettable switch that protects the generator from electrical overload.

8. 120/240v 4-Prong Receptacle - Use to connect electrical devices that run 120 or 240 Volt, 60Hz,

single phase, AC current (NEMA 14-50).

9. Ground Terminal - Connect a ground wire here to properly ground the generator.

10. 120/240v 4-Prong Twist Lock - Use to connect electrical devices that run 120 or 240 Volt, 60Hz,

single phase, AC current (NEMA L14-30).

11. Battery - 12V DC 7ah Battery that powers the Electric Start System.

8. 120/240v

4-Prong Receptacle

7. Circuit Breaker

11. Battery

10. 120/240v

4-Prong Twist

Lock

5. 120v 3-Prong

Receptacle

4. Fuel Select Switch

2. Engine Switch

6. Digital Volt

Meter/ Hour Meter

12. Choke

13. Fuel Valve