Operating Guide

-20 20 40 60 800 100 F

-30-40 -10 0 10 20

-20

40 C

10W-30

ENVIRONMENTAL TEMPERATURE

5W-30

SAE

GENERATOR SETUP (CONTINUED)

Add oil

The generator requires engine oil to operate properly. The generator, when new from the package

contains no oil in the crankcase

. You must add the proper amount of oil before operating the

generator for the rst time. This amount is equal to the oil capacity of the engine crankcase:

WARNING: Do not apply engine oils with additives or 2-stroke gasoline engine oils. They don’t

have enough lubrication, and may shorten the engine’s service life.

a. Make sure the generator is on a level surface.

b. Unscrew the oil ller cap from the engine .

c. Using a funnel, add the appropriate amount of oil

into the crankcase. You can check the oil level of the

generator with the dipstick located below the oil

ller cap. Simply pull the dipstick out and the

indicated oil level is on the end of the stick.

d. Replace oil ller cap.

Step 3 - Adding Oil

Engine oil recommended: SAE 10W-30. Viscosity varies with

regions and temperatures. Choose your oil viscosity using the

chart to the left.

* A small amount of oil from factory testing may be present on

arrival.

Model Number XP15000EH

Engine Oil Capacity 54 . oz (1.6L)

WARNING: DO NOT overll the crankcase. This

may damage the motor and shorting overall life

of your generator.