Operating Guide

29
Check fuel select
Make sure the fuel select switch is set to LPG.
5.
Turn breaker on / connect
The breaker is located on the right side of the front power
panel. Flip the breaker up to allow power to ow to the
receptacles. Connect your devices to the receptacles on the
front panel. Start with the largest loads rst.
8.
Open choke
The choke lever is located to the left of the panel. Push in
to open the choke and increase air into the carburetor for
normal running.
6.
7.
Start
The key switch is located on the left side of the front power
panel. Insert the key and turn to the start position to start
the generator. Allow the key to return to the on position
once started.