Replacement Part List

Ⅸ. Transportation and Storage
CAUTION:
·To avoid causing a fire hazard, let the engine cool down
before transportation or indoor storage of the pump.
··Before transporting the pump, set the fuel tap to the OFF
position and place the pump body in a level position to prevent
the fuel from spilling out. The spilled gasoline or the gasoline
vapor may get ignited.
·Note and do the following before storing pump for an extended
period of time:make sure the storage area is free of moisture
or dust.
·Clean the inside of the pump. The pump may get clogged if it
is used to suck up water containing such matter as earth, sand
or heavy fragments.
·Before storing, clean the pump by sucking up clean water or
otherwise the impeller may be damaged when the pump is put
to use again. After cleaning, unscrew the water drain plug to
drain off the water from inside the pump casing as much as
possible. Then screw the drain plug back into place.
3) Drain off the fuel.
a. Turn off the fuel tap (OFF position), unscrew the drain
screw from the carburetor float chamber to drain off the fuel
from inside the carburetor and collect the gasoline in a suitable
container.
b. Turn on the fuel tap (ON position) and collect the gasoline in
a suitable container.
20