Product Manual

CAUTION: The DC receptacle is for recharging 12 Volt automotive-type batteries

only. Do not connect any other device to this receptacle.

CAUTION: Never try to jump start a car with your generator.

USING THE GENERATOR (CONTINUED)

DC Usage

Connect the battery

Connect positive receptacle

Start the generator

Connect one charging wire to the positive terminal on the

battery and the other charging wire to the negative terminal

on the battery.

Connect the free end of the positive wire to the positive

receptacle (outlet) on the generator.

The engine switch is located on the left side of the front

power panel. Press the switch up to the “START” Position.