Specifications

Installer’s Guide – Endurance six™
3
Part No: IG090701
Version: B
 Refer to the Owner’s Manual and
AG 601 for detailed installation
instructions.
• Plan hot water pipework to ensure
optimum ow rates to all outlets.

• Check labels located on the unit’s
side for:
a. maximum inlet water pressure; a
Pressure Limiting Valve may be
required.
b. gas supply pressure requirements
(minimums = 1.13kPa for Natural
Gas, 2.75kPa for LPG)
c. gas type – is the unit set up for
the gas supplied to the property?
• Ensure that the property’s gas
meter is able to supply sufcient
volume of gas and pressure in the
event of all gas appliances on site
operating simltaneously at maximum
gas consumption levels. For LPG
installations, conrm bottle size is
adequate. This water heater uses
199 MJ/h of gas.
Installation Guide
Labels