Specifications

Installer’s Guide – Endurance six™
7
Part No: IG090701
Version: B

Installation Of Main
Remote Control
• Detach the tting bracket from Main
remote controller by sliding it down.
• Attach the tting plate to wall.
• Install conduit inside of wall in
advance and secure the wiring box.
• Pass remote controller cables
through conduit.
• Then pass the cables through the
hole of the tting bracket and pull
them out.
• Attach the tting bracket with screws
adjusting the screw hole to the wiring
box.
• Connect the remote controller
cables to the terminal for the remote
controller of PCB.
• If controllers are installed, the
maximum temperature setting will
still be 50°C.
Installation Guide
Main Remote Control
Model CMR-2252
Bad examples
Do Not
Chemicals
Wiring box
Cover
Cover
Wood screw
Remote controller
fitting bracket
Remote controller
Wiring box
Hole for wiring
Screw
Remote controller
fitting bracket
Hook
Remote controller
cables
Slot
Terminal